Severe plastic deformation (SPD) processes for metals

A Azushima, R Kopp, A Korhonen, DY Yang, F Micari… - CIRP annals, 2008 - Elsevier
Processes of severe plastic deformation (SPD) are defined as metal forming processes in
which a very large plastic strain is imposed on a bulk process in order to make an ultra-fine …

[HTML][HTML] Recent trends in producing ultrafine grained steels

H Halfa - Journal of Minerals and Materials Characterization and …, 2014 - scirp.org
Ultrafine grained steels with grain sizes below about 1 μm offer the prospect of high strength
and high toughness with traditional steel compositions. These materials are currently the …

Enhanced ductility of nanocrystalline and ultrafine-grained metals

IA Ovid'Ko, TG Langdon - Reviews on Advanced Materials …, 2012 - eprints.soton.ac.uk
This article briefly summarizes the extensive information now available, from recent
experiments and theoretical models, addressing the enhanced tensile ductility of …

Delamination effect on impact properties of ultrafine-grained low-carbon steel processed by warm caliber rolling

T Inoue, F Yin, Y Kimura, K Tsuzaki, S Ochiai - Metallurgical and materials …, 2010 - Springer
Bulk ultrafine-grained (UFG) low-carbon steel bars were produced by caliber rolling, and the
impact and tensile properties were investigated. Initial samples with two different …

High strength-superplasticity combination of ultrafine-grained ferritic steel: The significant role of nanoscale carbides

JW Liang, YF Shen, RDK Misra, PK Liaw - Journal of Materials Science & …, 2021 - Elsevier
There is currently a gap in our understanding of mechanisms that contribute to high strength
and high plasticity in high strength UFG ferritic steel with nano-size Fe 3 C carbides in …

Effect of ferrite grain size on tensile deformation behavior of a ferrite-cementite low carbon steel

N Tsuchida, H Masuda, Y Harada, K Fukaura… - Materials Science and …, 2008 - Elsevier
Stress–strain curves for ferrite-cementite (FC) steels with ferrite grain sizes between 0.47
and 13.6 μm were studied by tensile tests with strain rates of 103, 100, and 3.3× 10− 4s− 1 at …

Tensile deformation behavior of Fe–Mn–C TWIP steel with ultrafine elongated grain structure

T Lee, M Koyama, K Tsuzaki, YH Lee, CS Lee - Materials Letters, 2012 - Elsevier
An Fe–17Mn–0.6 C steel with ultrafine elongated grain structure was successfully produced
utilizing a multi-pass caliber-rolling process at 773K. The uniform elongation of the …

Microstructure and mechanical properties of caliber rolled Mg–Y–Zn alloys

H Somekawa, D Ando - Materials Science and Engineering: A, 2020 - Elsevier
The microstructural evolution and mechanical properties were investigated using a caliber
rolled Mg–5Y-2.5 Zn (in at.%) alloy. Deformation kink bands could be induced by the caliber …

Nanosized precipitates activating ultrahigh strength of an ultrafine-grained ferritic steel during dynamic deformation

JW Liang, YF Shen, YZ Li, XW Feng… - Materials Science and …, 2022 - Elsevier
Although mechanical behaviors of ultrafine grained steel containing nanosized particles at
low strain rates was extensively studied, its mechanical performance at high strain rates was …

Deformation behaviors of flat rolled wire in twinning-induced plasticity steel

JK Hwang - Metals and Materials International, 2020 - Springer
The influence of room temperature flat rolling on microstructure, mechanical properties, and
shape change in twinning-induced plasticity (TWIP) steel wire has been investigated to …