High entropy alloys (HEAs) and HEAs-related materials have developed rapidly over the last
decade, and the key issues have gradually emerged when the welding of HEAs are …

The diffusion brazing of Inconel 617 and AISI 321 stainless steel was carried out with a 50
μm thick AMS 4772 Ag interlayer at a constant brazing temperature of 750° C under a …

The plate-fin heat exchanger (PFHE) is the core equipment used to achieve the high
efficiency of solid oxide fuel cell (SOFC), however, the issues of high-performance brazed …

Elastic modulus and hardness of Inconel 625/BNi-2 vacuum brazed joint microregion are
investigated by the high temperature nanoindentation technique, and its microstructure is …

In this research, vacuum transient liquid phase bonding of Inconel 939 superalloy was
performed using an amorphous Ni–Cr–Fe–Si–B filler alloy at different temperatures from …

The microstructure and mechanical properties of transient liquid phase (TLP) bonded joints
between dissimilar precipitation hardened IN939 and solid solution hardened IN625 with a …

Joining single crystal superalloy with polycrystalline superalloy has important applications in
the aerospace industry. Here, the IC10 single crystal superalloy to GH536 polycrystalline …

Transient liquid phase (TLP) bonding as an effective and precise bonding process attracted
enormous attentions. However, there are several parameters affecting the mechanical …

The aim of this study was evaluating the influence of ER321 and ERNiCr-3 filler metals on
the mechanical performance of the Inconel 625 gas tungsten arc welded joints at room and …

Gas turbine blades working under extremely harsh operating conditions are made of
superalloys. These superalloys are exposed to various damage mechanisms, which wear …