Flash sintering is a novel field‐assisted sintering technology for ceramics that allows a
dramatic reduction in processing time and temperature. Since 2010, when flash sintering …

Partial discharge (PD) detection and analysis plays a crucial role for acceptance testing and
condition monitoring of power cables. Various aspects are related to PD in power cables …

This paper presents an extensive review of the most effective and modern monitoring
methods for electrical power lines, with particular attention to high-voltage (HV) and medium …

The presence of air-filled cavities within the insulation of active power cables affects the
electric field distribution in the insulation bulk and increases the electrical stress inside and …

Inspection of partial discharge before contamination flashover is of great importance for
preventing exterior insulation accidents. In this study, a new method for identification of …

Partial Discharges (PD) in cavities are responsible for the greatest ageing rate in polymeric
solid dielectrics due to chemical and physical deterioration mechanisms activated by the …

High‐frequency sinusoidal voltage excitation is proposed as a feasible method to solve the
difficulty of partial discharge detection at the epoxy interface. In order to study the …

The presence of lightning impulses (LIs) on the DC waveform can seriously influence the
insulation performance of a GIL system. The waveshape can be a superposition of the DC …

The reliability of electrical assets is greatly influenced by the quality of their insulations. Key
power installations such as power cables are manufactured with polymer-based materials …

The dielectric breakdown of solid polymeric materials is due to the inception and
propagation of electrical trees inside them. The remaining useful life of the solid dielectrics …