As the most noticeable plasma-oriented material (PFM), metal tungsten is widely used in
nuclear fusion reactors. However, its oxidation resistance is poor at high temperatures …

An AlSiY coating and two MCrAlY+ AlSiY composite coatings with different thickness of
MCrAlY interlayer were prepared by arc ion plating (AIP) and vacuum annealing. The …

Abstract In this study, Al/TiC–Al 2 O 3 nanocomposite was synthesized via mechanical
alloying and heat treatment. Phase development and structural changes were studied by X …

Abstract In this study, Ti 3 AlC 2/Al 2 O 3 nanocomposite powder was synthesized via
mechanical alloying from TiO 2, Al, and C as raw materials. Phase development and …

Abstract (Mo, W) Si 2–20 vol% Al 2 O 3 composites containing 0, 2.5, 5 and 10 mol% WSi 2
were prepared by pressureless sintering at 1550° C in H 2 atmosphere, with the raw …

Co–Cr based alloys are recognized as one of the most widely used category of alloys
amongst the biomedical materials. This is because these alloys show a high strength …

Abstract Ti 3 AlC 2/Al 2 O 3 nanocomposite powder was synthesized by mechanical-
activation-assisted combustion synthesis of TiO 2, Al and C powder mixtures. The effect of …

Abstract Microstructural aspects of CoWSi–WSi 2 coating on pure Ni and its oxidation
performance under cyclic heating and cooling conditions in air at 900, 1100 and 1300° C …

In this research, the microstructural and phase evolutions during mechanical alloying (MA)
and subsequent heat treatment of Cu–Ti powder mixture are investigated through x-ray …

For the first time, Ti2SnC powder was directly fabricated by high-temperature ball milling
with Sn, Ti, and graphite as reactants and was compared with Ti2SnC formation by …