The oxidation kinetics of Ti-6Al-4V alloys fabricated by LBM and EBM, HIP-treated or not, are
similar to that of a rolled annealed Ti-6Al-4V alloy, as regards oxide layer and oxygen …

Electrochemical measurements and microstructural analysis were performed to study the
corrosion resistance of different planes of Ti-6Al-4V alloy manufactured by selective laser …

Additive manufactured Ti6Al4V alloy has excellent comprehensive properties and has broad
application prospects in the aerospace, biomedicine, and other fields. However, the …

In this study, continuous wave (CW) and pulsed wave (PW) lasers (pulse frequencies of 5,
50, and 500 Hz) were used to weld TC4 alloy joints, and the microstructure and corrosion …

The effect of the Mo element on the Ni-Ti-Zr refractory high-entropy alloy (RHEA) coatings
synthesized by laser cladding were explored in terms of microstructural evolution and …

In this study, the different corrosion behaviors between α and β phases of Ti6Al4V in
solutions with different NaF concentrations are investigated. When the NaF concentration …

The Ti-based composite coating of TiN+ TiB/TC4 is successfully fabricated by laser cladding.
The results show that the addition of BN promotes the in-situ formation of an elliptic TiN …

The high-temperature oxidation resistance of laser additive manufactured (LAM) Ti6Al4V
before and after laser shock processing (LSP) was investigated. The samples were oxidized …

Corrosion and tribocorrosion behaviour of modified Ti surfaces through thermochemical
treatments has been studied. Electrochemical Impedance Spectroscopy (EIS) and …

Corrosion and passivation behaviors of annealed Ti–20Zr–6.5 Al–4V alloys were
investigated in NaCl and HCl solutions. All the alloys exhibited spontaneous passivity and …