Traditionally, inertia in power systems has been determined by considering all the rotating
masses directly connected to the grid. During the last decade, the integration of renewable …

Preservation of the environment has become the main motivation to integrate more
renewable energy sources (RESs) in electrical networks. However, several technical issues …

The utilization of renewable energy sources (RESs) has become significant throughout the
world, especially over the last two decades. Although high-level RESs penetration reduces …

Large-scale deployment of Renewable Energy Sources (RES) has led to significant
generation shares of variable RES in power systems worldwide. RES units, notably inverter …

In comparison of the conventional bulk power plants, in which the synchronous machines
dominate, the distributed generator (DG) units have either very small or no rotating mass …

With an increasing penetration of wind power in the modern electrical grid, the increasing
replacement of large conventional synchronous generators by wind power plants will …

In several countries, the wind power penetration increased tremendously in recent years. To
ensure the proper functioning of the power system, some grid operators already require the …

In this paper an extensive literature review on load–frequency control (LFC) problem in
power system has been highlighted. The various configuration of power system models and …

Inertial response is gradually becoming a mandatory requirement for wind turbine (WT)
integrated into power system. However, most inertia control strategies are implemented in …

This paper introduces a method to improve the primary frequency contribution of grid
connected variable speed wind turbine generators (WTGs). Using their energy reserve …