High entropy alloys (HEAs) and HEAs-related materials have developed rapidly over the last
decade, and the key issues have gradually emerged when the welding of HEAs are …

The paper presents first of its kind study on the creep-fatigue interaction (CFI) behavior of
simulated coarse grain (CG), fine grain (FG) and inter-critical (IC) heat-affected zones …

In this paper, a comprehensive study combined multiple characterizations and SPH
numerical simulation was conducted to investigate the microstructure evolution, extreme …

Determining tensile properties from small punch test is being pursued actively in the nuclear
industry due to the limited volume of material such tests use compared with standard tests …

Low cycle fatigue tests were conducted on the weld metal, coarse grain heat-affected zone
(CGHAZ), fine grain heat-affected zone (FGHAZ), inter-critical heat-affected zone (ICHAZ) …

Dissimilar high-energy beam (HEB) welding is necessary in many industrial applications.
Different composition of heat-affected zone (HAZ) and weld metal (WM) lead to variation in …

In this study, the microstructures of the three principal heat-affected zones (HAZs) of the P91
steel weld joint were simulated using appropriate heat treatments at different soaking …

The present study centres on the effect of post-weld heat treatment (PWHT) on
microstructure and mechanical properties of the deep penetration keyhole Tungsten Inert …

Strength variations in various regions of a dissimilar weld joint made between 316LN
stainless steel (SS) and P91 steel after creep exposure at 550° C and stress of 200 MPa was …

In this paper, post bonding heat treatments to transient liquid phase bond reduced activation
ferrite/martensitic steel were conducted, with a Fe–Si–B amorphous foil as the interlayer …