Microstructural modification and tensile behavior of IF steel processed through surface mechanical attrition treatment
Y Shadangi, K Chattopadhyay, V Singh - Jom, 2020 - Springer
The present investigation deals with the impact of surface mechanical attrition treatment
(SMAT) on the surface roughness, microstructure, phase stability, hardness, and tensile …
(SMAT) on the surface roughness, microstructure, phase stability, hardness, and tensile …
Bulk ultrafine-grained interstitial-free steel processed by equal-channel angular pressing followed by flash annealing
Interstitial-free steel workpieces are deformed by equal-channel angular pressing (ECAP)
for equivalent strain ε vm= 3 and ε vm= 21 followed by flash annealing. Microstructures are …
for equivalent strain ε vm= 3 and ε vm= 21 followed by flash annealing. Microstructures are …
Development of high-strength bulk ultrafine-grained low carbon steel produced by equal-channel angular pressing
Low carbon steel (LCS) workpieces have been deformed by equal-channel angular
pressing (ECAP) at a large equivalent strain of 16.8 at room temperature. The mechanisms …
pressing (ECAP) at a large equivalent strain of 16.8 at room temperature. The mechanisms …
Correlation between Lüders band formation and precipitation kinetics behaviour during the industrial processing of interstitial free high strength steels
Lüders band formation in steels is critical to surface finish during automobile panel
manufacturing. This research reports on the problem of Lüders band formation in interstitial …
manufacturing. This research reports on the problem of Lüders band formation in interstitial …
Recovery of ductility in ultrafine-grained low carbon steel processed by electropulsing
Workpieces of a low carbon steel (LCS) are deformed by equal-channel angular pressing
(ECAP) up to an equivalent strain of 6 in their as-received, coarse-grained condition. ECAP …
(ECAP) up to an equivalent strain of 6 in their as-received, coarse-grained condition. ECAP …
Microstructural refinement and mechanical properties of ferritic stainless steel processed by equal-channel angular pressing
Ferritic stainless steel (FSS 430) has been deformed by equal-channel angular pressing
(ECAP) at room temperature at an equivalent strain (ε vm) of 1.2 by adopting the route B c …
(ECAP) at room temperature at an equivalent strain (ε vm) of 1.2 by adopting the route B c …
Effect of grain refinement on tribological study of low carbon steel
Tribological characteristics of low carbon steel (LCS) have been investigated on as-received
coarse grains of 67 μm size and ultrafine-grained (UFG) microstructure of 0.2 μm size, which …
coarse grains of 67 μm size and ultrafine-grained (UFG) microstructure of 0.2 μm size, which …
Effect of Electropulsing on Nanostructured Bainitic Steel
Abstract Novel steel of Fe-0.81 C-1.9 Mn-1.48 Si-0.27 Mo-0.95 Ni-1.43 Co-0.79 Al
composition was austenitized at 930° C and isothermally treated at 240° C for different …
composition was austenitized at 930° C and isothermally treated at 240° C for different …