Pulsed electroplating of ZrO2-reinforced Ni-Cr alloy coatings from the duplex complexing agents-containing bath for engineering applications: Importance of operating …
The progress in tribocorrosion performance of the engineering parts is in dire need of
improving their surface properties. In the present contribution, Ni-Cr-ZrO 2 layers were …
improving their surface properties. In the present contribution, Ni-Cr-ZrO 2 layers were …
[PDF][PDF] Improvement of Corrosion and Sliding Wear Behavior of Tin-Bronze Alloys Reinforced by ZrO2 Particles Prepared via Powder Technology
Powder metallurgy was used to generate samples of an alloy consists of tin-bronze with a
chemical composition of 90% Cu and 10% Sn in the current study. To generate the samples …
chemical composition of 90% Cu and 10% Sn in the current study. To generate the samples …
Influence of nano chromium addition on the corrosion and erosion–corrosion behavior of cupronickel 70/30 alloy in seawater
Cupronickel alloys have found widespread use in various applications such as heat
exchangers, refrigeration systems, equipment, pumps, and pipes. However, the inherent …
exchangers, refrigeration systems, equipment, pumps, and pipes. However, the inherent …
Comparative in-vitro microscopic evaluation of vertical marginal discrepancy, microhardness, and surface roughness of nickel–chromium in new and recast alloy
Reusing of alloy has become a need of time due to the increasing demand, depletion of
resources, and substantial increase in their price. The alloys used require a long-term stay in …
resources, and substantial increase in their price. The alloys used require a long-term stay in …
Corrosion reduction of aluminum alloy 6061 via micro arc oxidation coatings
The corrosion features of micro-arc oxidation coatings (MAO coatings) precipitated on 6061-
Al alloy at a current density of 1.61 amp/cm2 were examined in this work. To assess the …
Al alloy at a current density of 1.61 amp/cm2 were examined in this work. To assess the …
Electrodeposition of a Ni/TaC composite coating on 316L SS and its corrosion behavior in 3.5% sodium chloride solution
This work tries to use a composite coating (co-deposition coating) and assesses, develops
the Nickel coatings properties by combining particles of tantalum carbide into the …
the Nickel coatings properties by combining particles of tantalum carbide into the …
Effect of Multi-Walled Carbon Nanotubes (MWCNTs) in Reducing the Corrosion Rate in Cr-MWCNTs Composite Coatings
Carbon steel was coated with Cr-multi-walled carbon nanotube (MWCNTs) coatings via
electrodeposition. In this article, the impact of a combination of MWCNTs into the chromium …
electrodeposition. In this article, the impact of a combination of MWCNTs into the chromium …
Impacts of tin and germanium on corrosion and erosion-corrosion behavior of 60Cu–40Zn alloys
The phenomenon of dezincification is responsible for brass's low corrosion resistance in
certain situations. A trace amount addition of arsenic to α--brasses prevent dezincification …
certain situations. A trace amount addition of arsenic to α--brasses prevent dezincification …
Effect of Multi-Walled Carbon Nanotubes (MWCNTs) in Reducing the Corrosion Rate in Cr-MWCNTs Composite Coatings
NMDAM Nattahb, TA Jasimc - Materials Engineering and Science, 2022 - torrossa.com
Carbon steel was coated with Cr-multi-walled carbon nanotube (MWCNTs) coatings via
electrodeposition. In this article, the impact of a combination of MWCNTs into the chromium …
electrodeposition. In this article, the impact of a combination of MWCNTs into the chromium …