In recent years, much progress has been made in the studies of nanostructured Al alloys for
advanced structural and functional use associated both with the development of novel …

In this work, SiC np/Al6082 aluminum matrix composites were prepared by squeeze casting
(SC) combined with stir casting, and the effects of nano-sized SiC particles (SiC np) and SC …

The effect of equal channel angular pressing (ECAP) at different temperatures (room
temperature, 120, 150 and 180° C) on microstructure and mechanical properties of Al-7075 …

Samples with one through three passes with 100% overlap were created using friction stir
processing (FSP) in order to locally modify the microstructural and mechanical properties of …

Abstract Severe Plastic Deformation (SPD) is a unique approach to processing the bulk
material into ultrafine grain (UFG) structured material which possesses high ductility and …

To provide the process parameters for preparing semi-solid billets, the impacts of heating
temperature on recrystallization of a hot-extruded 6A02 aluminum alloy in solid and semi …

There is an increasing demand for precipitation-hardened Cu-Ni-Si alloys in the industry,
where the high strength and moderate electrical conductivity are required. The main …

In this study we discuss the effect of heterogeneous microstructure obtained by hydrostatic
extrusion on precipitation phenomena in commercially available Al–Mg–Si alloy. After …

Friction stir welding of 6082 AA-T651 was performed using three different combinations of
feed rates (90, 140 and 224mm/min) and tool rotational speeds (850, 1070 and 1350rpm) …

Microstructure characterization and identification of the different nature of boundary
formation during severe plastic deformation is the basis for a quantitative analysis of material …