Nano-lamellar materials with ultrahigh strengths and unusual physical properties are of
technological importance for structural applications. However, these materials generally …

Current heterostructured materials demonstrate the high potential to circumvent strength-
ductility tradeoff but face challenges with unconfigurable hetero-zone distribution and …

In order to improve the intrinsic brittleness of TiAl alloys, Ti 2 AlNb alloys with outstanding
ductility and toughness at room temperature, and good high-temperature performance are …

The stability, mechanical properties and electronic structures of Ti 3 Al, TiAl, TiAl 2 and TiAl 3
have been systematically investigated by the first-principles calculation. The four Tisingle …

In this work, laminated Al/Ti composites were fabricated by hot rolling at three different
temperatures (400° C, 450° C and 500° C). The deformation behavior and fracture …

Laminated metal composites (LMCs) of titanium and aluminum (Ti/Al), combining the high
strength and thermal stability of titanium with the low density and corrosion resistance of …

Abstract Al/Mg/Al laminate was fabricated by four-pass rolling with a total rolling reduction of
71% followed by annealing at 200° C for 1 h. Intermetallics identified as Mg 17 Al 12 and Al …

To improve the high-temperature deformability of TiAl intermetallics, a TiAl–Nb intermetallic
matrix composite was prepared by powder metallurgy to try to introduce the deformable β …

TiAl alloys with low density, high creep resistance and high temperature performance are
considered as candidate materials to replace nickel-based superalloys in the range of 700∼ …

Titanium intermetallics are highly significant to protect surfaces of lightweight structures
against corrosion and wear. In this study, Ti and Al powders were uniformly mixed with an …