[HTML][HTML] Recent progress in preparation of bimodal grain structure and improvement of mechanical and corrosion properties of magnesium alloys
Nowadays, magnesium (Mg) alloys are increasingly being considered as a promising
lightweight structural material because of their inherent low density and high specific …
lightweight structural material because of their inherent low density and high specific …
[HTML][HTML] Achieving excellent mechanical properties in Mg-5Bi-3Al alloy via ultra-fine grain and high-density precipitates
H Li, C Wang, Y An, E Guo, S Shi, F Yu, Z Chen… - Journal of Magnesium …, 2024 - Elsevier
The development of low-cost, high-performance Mg alloys is crucial to the industrial
applications of large-scale production of Mg alloys. In this work, extruded Mg-5Bi-3Al alloy …
applications of large-scale production of Mg alloys. In this work, extruded Mg-5Bi-3Al alloy …
Microstructure, texture and mechanical properties of Mg-2.10 Zn-0.58 Ca-1.02 Zr-10.34 SiCp (wt%) composites after being extruded at different speeds
Abstract The Mg-2.10 Zn-0.58 Ca-1.02 Zr-10.34 SiC p (wt%, SiC p/ZX20K) composites were
fabricated by stir casting and hot extruded at 400° C with extrusion speed of 5 mm/s and 10 …
fabricated by stir casting and hot extruded at 400° C with extrusion speed of 5 mm/s and 10 …
[HTML][HTML] Evolution of grain characteristics and dynamic recrystallization behavior of Cu–15Ni–8Sn alloy under different extrusion ratios
K Huang, Y Zhang, Y Zhou, R Yang, X Meng… - Journal of Materials …, 2024 - Elsevier
For atmospheric melting cast Cu–15Ni–8Sn alloy, hot extrusion tests were conducted on
ingots of Cu–15Ni–8Sn alloy with varying extrusion ratios (5, 12 and 16) following …
ingots of Cu–15Ni–8Sn alloy with varying extrusion ratios (5, 12 and 16) following …