Pulsed laser remelting supersonic plasma sprayed Cr3C2-NiCr coatings for regulating microstructure, hardness and corrosion properties
K Chong, Y Zou, D Wu, Y Tang, Y Zhang - Surface and Coatings …, 2021 - Elsevier
Supersonic atmosphere plasma sprayed Cr 3 C 2-NiCr coatings have been gradually used
for protecting industrial components from the severe wear and corrosion attack. In this study …
for protecting industrial components from the severe wear and corrosion attack. In this study …
High temperature wear performance of HVOF-sprayed Cr3C2-WC-NiCoCrMo and Cr3C2-NiCr hardmetal coatings
W Zhou, K Zhou, Y Li, C Deng, K Zeng - Applied Surface Science, 2017 - Elsevier
Abstract A novel Cr 3 C 2-WC-NiCoCrMo and commercial Cr 3 C 2-NiCr thermal spray-
grade powders with particle size of− 45+ 15 μm were prepared by an agglomeration and …
grade powders with particle size of− 45+ 15 μm were prepared by an agglomeration and …
High temperature erosion–oxidation of Cr3C2–NiCr thermal spray coatings under simulated turbine conditions
S Matthews, B James, M Hyland - Corrosion science, 2013 - Elsevier
Most erosion–oxidation research has been directed at high erodent flux, low impact velocity
conditions typical of fluidised bed conditions. Few works have investigated erosion …
conditions typical of fluidised bed conditions. Few works have investigated erosion …
Micromechanical properties and sliding wear behaviour of HVOF-sprayed Fe-based alloy coatings
G Bolelli, B Bonferroni, J Laurila, L Lusvarghi, A Milanti… - Wear, 2012 - Elsevier
The tribological performance of two Fe–Cr–Ni–Si–B–C (Colferoloy) alloy coatings
manufactured by HVOF thermal spraying was studied by rubber-wheel dry particle abrasion …
manufactured by HVOF thermal spraying was studied by rubber-wheel dry particle abrasion …
Advanced chromium carbide-based hardfacings
Ceramic metal composite powders are widely used in thermal spray technologies; however,
application of such hardphases in cladding systems has not been strongly developed yet. In …
application of such hardphases in cladding systems has not been strongly developed yet. In …
Effect of alumina dispersion on oxidation behavior as well as friction and wear behavior of HVOF-sprayed CoCrAlYTaCSi coating at elevated temperature up to 1000° …
G Hou, Y An, X Zhao, H Zhou, J Chen - Acta Materialia, 2015 - Elsevier
CoCrAlYTaCSi alloy coating and CoCrAlYTaCSisingle bondAl 2 O 3 composite coating
were prepared on Inconel 718 alloy substrate by high velocity oxy-fuel (HVOF) spraying in …
were prepared on Inconel 718 alloy substrate by high velocity oxy-fuel (HVOF) spraying in …
Microstructure and cavitation–silt erosion behavior of high-velocity oxygen–fuel (HVOF) sprayed Cr3C2–NiCr coating
S Hong, Y Wu, Q Wang, G Ying, G Li, W Gao… - Surface and Coatings …, 2013 - Elsevier
In this paper, a Cr3C2–NiCr coating was prepared by means of high-velocity oxygen–fuel
(HVOF) thermal spraying process and analyzed with regard to their cavitation–silt erosion …
(HVOF) thermal spraying process and analyzed with regard to their cavitation–silt erosion …
Achieving superior hot corrosion resistance by PVD/HVOF duplex design
P Tang, D He, W Li, L Shang, H Zhai, L Wang… - Corrosion Science, 2020 - Elsevier
In this study, an optimized duplex coating, consisting of a thick Cr 3 C 2-NiCr interlayer and a
top CrN film, were designed and deposited by HVOF and PVD. And then hot corrosion …
top CrN film, were designed and deposited by HVOF and PVD. And then hot corrosion …
Oxidation behaviour and properties of carbide ceramic reinforced Ni-based composite coatings at 700° C
To improve the wear and corrosion properties of the coatings, WC-12Co and Cr 3 C 2-
25NiCr carbide ceramic reinforced Ni-based coatings were prepared, and pre-oxidation of …
25NiCr carbide ceramic reinforced Ni-based coatings were prepared, and pre-oxidation of …
Comparison on multi-angle erosion behavior and mechanism of Cr3C2-NiCr coatings sprayed by SPS and HVOF
X Zhang, F Li, Y Li, Q Lu, Z Li, H Lu, X Ran… - Surface and Coatings …, 2020 - Elsevier
Thermally sprayed cermet coatings are widely used to improve the wear resistance of
component surfaces. In this study, Cr 3 C 2-NiCr cermet coatings were deposited by shroud …
component surfaces. In this study, Cr 3 C 2-NiCr cermet coatings were deposited by shroud …