This article presents the results of experiments on the optimization of down sprue geometry
in the process of pouring sand molds. Theoretical assumptions and computer simulation …

The work deals with technology Patternless process that combines 3 manufacturing process
mold by using rapid prototyping technology, conventional sand formation and 3D milling. It's …

Use of welding technology for the repair of steel castings is particularly common in two
areas. These include weld surfacing of protrusions that remained incomplete after casting, or …

Submitted article deals with the methods to improve mould breathability when using the
Patternless process method and also examines the influence of opening material grain size …

The article summarizes the theoretical knowledge from the field of brazing of graphitic cast
iron, especially by means of conventional flame brazing using a filler metal based on CuZn …

The present article deals with the possibility of using the reverse engineering method for the
production of prototype molds by Patternless process technology. Article describes method …

The paper deals with the impact of technological parameters on the heat transfer coefficient
and microstructure in AlCu4Ti alloy using squeeze casting technology. The casting with …

The paper deals with the methodology of heat transfer coefficient measuring while using
squeeze casting process. The casting with crystallization under pressure was used …

Material properties in cast condition are largely influenced by its structure. Here you can
influence, for example the speed of solidification, or metallurgical operation. In the case of …