Abstract MAX phases (Ti 3 SiC 2, Ti 3 AlC 2, V 2 AlC, Ti 4 AlN 3, etc.) are layered ternary
carbides/nitrides, which are generally processed and researched as structure ceramics …

MAX phases are a large family of materials with more than 150 different compositions that
have been extensively investigated during the last 25 years. They present a layered …

MoAlB has been the only known compound with attractive oxidation resistance in the MAB
family so far. To widen the application of the MoAlB material in high temperature …

High temperature oxidation of alumina-forming MAX phases, Ti 2 AlC and Cr 2 AlC, were
examined under turbine engine environments and coating configurations …

The nanolaminated ternary boride Fe 2 AlB 2 exhibits a combination of damage tolerance,
electrical conductivity, and machinability at room temperature. This work reports for the first …

MAX phases are a relatively new family of materials with general formula of Mn+ 1AXn,
where M corresponds to an early transition metal, A is a A-group element (IIIA or IVA …

Cr2AlC foams have been processed for the first time containing low (35 vol%), intermediate
(53 vol%), and high (75 vol%) content of porosity and three ranges of pore size, 90‐180 μm …

A rapid throughput thermal shock resistance evaluation method was developed and tested
on Ti 3 SiC 2 ceramic traditionally known for its excellent thermal shock resistance. The …

A new class of ceramic matrix composites based on Cr 2 AlC MAX-phase containing 5 and
10 wt.% of SiC fibers was developed in this investigation. The Cr 2 AlC/SiC composites were …

Experimental data are presented on the high-temperature synthesis of cast materials in the
Cr–Al–C system with a maximum content of the MAX phase Cr 2 AlC. Experiments were …