On the tribology of the MAX phases and their composites during dry sliding: A review
S Gupta, MW Barsoum - Wear, 2011 - Elsevier
By now, it is fairly well established that the layered hexagonal MAX phases are
thermodynamically stable nanolaminates displaying unusual and sometimes unique …
thermodynamically stable nanolaminates displaying unusual and sometimes unique …
Introduction to 2D MXenes: fundamental aspects, MAX phases and MXene derivatives, current challenges, and future prospects
MXenes (transition metal carbides and nitrides/carbonitrides) are a novel type of two-
dimensional (2D) materials that are derived from MAX-phase precursors. Their structural …
dimensional (2D) materials that are derived from MAX-phase precursors. Their structural …
Revealing fretting wear resistance mechanism under liquid lead-bismuth eutectic of Cr-Al-C composite coatings fabricated by laser cladding
Y Cao, K Hua, L Sun, H Ding, H Wu, H Wang - Tribology International, 2024 - Elsevier
Laser cladding technology was utilized to construct protective coatings on the surfaces of
service materials and to study the mechanical and fretting wear properties of the coatings …
service materials and to study the mechanical and fretting wear properties of the coatings …
Evaluation of properties of spark plasma sintered Ti3SiC2 and Ti3SiC2/SiC composites
The powder mixtures of Ti, Si, TiC and Al were sintered to synthesize Ti 3 SiC 2 and Ti 3 SiC
2/SiC by spark plasma sintering (SPS) method. Single phase Ti 3 SiC 2 and Ti 3 SiC 2/SiC …
2/SiC by spark plasma sintering (SPS) method. Single phase Ti 3 SiC 2 and Ti 3 SiC 2/SiC …
Sliding wear of MAX phase composites Ti3SiC2–TiC and Ti3AlC2–Ti2AlC at 400° C and the influence of counterface material (steel, Al2O3, and Si3N4) on wear …
C Magnus - Wear, 2023 - Elsevier
This study explores the feasibility of employing MAX phase composite as impregnated solid
lubricants and/or as bulk material for advanced high temperature tribological applications …
lubricants and/or as bulk material for advanced high temperature tribological applications …
Microstructures and mechanical properties of Cu/Ti3SiC2/C/graphene nanocomposites prepared by vacuum hot-pressing sintering and hot isostatic pressing
Copper-graphite composite is an ideal friction material due to its good heat resistance, wear
resistance and friction coefficient stability. The addition of Ti 3 SiC 2 can improve strength …
resistance and friction coefficient stability. The addition of Ti 3 SiC 2 can improve strength …
Tribological behaviors of NiAl based self-lubricating composites containing different solid lubricants at elevated temperatures
X Shi, W Zhai, M Wang, Z Xu, J Yao, S Song, Y Wang - Wear, 2014 - Elsevier
An investigation was conducted on the possible beneficial synergistic effects of multiple
additives in self-lubricating composites for use in high temperature friction and wear …
additives in self-lubricating composites for use in high temperature friction and wear …
The Lubricating Properties of Spark Plasma Sintered (SPS) Ti3SiC2 MAX Phase Compound and Composite
MAX phase composites Ti3SiC2–TiCx and Ti3SiC2–(TiC x+ TiC) were synthesized and
consolidated via a powder metallurgy spark plasma sintering (SPS) technique. The bulk …
consolidated via a powder metallurgy spark plasma sintering (SPS) technique. The bulk …
Fretting wear properties of plasma-sprayed Ti3SiC2 coatings with oxidative crack-healing feature
M Zhou, W Lu, X Liu, W Zhai, P Zhang, G Zhang - Tribology International, 2018 - Elsevier
The present research describes a study to explore the possibility to improve the wear
resistance by healing microcracks that initiated under fretting wear. To this aim Ti 3 SiC 2 …
resistance by healing microcracks that initiated under fretting wear. To this aim Ti 3 SiC 2 …
Effects of surface microstructure on the active element content and wetting behavior of brazing filler metal during brazing Ti3SiC2 ceramic and Cu
HY Chen, XC Wang, L Fu, MY Feng - Vacuum, 2018 - Elsevier
The wetting behavior of Ag-Cu-xTi (x= 0, 0.5, 1, 2, 3, 4.5 wt.%) brazing filler metals on Ti 3
SiC 2 ceramic was investigated. Moreover, two methods, the addition of reactive element Ti …
SiC 2 ceramic was investigated. Moreover, two methods, the addition of reactive element Ti …