Physical and chemical aspects at the interface and in the bulk of CuInSe 2-based thin-film photovoltaics

S Ishizuka, J Nishinaga, K Beppu, T Maeda… - Physical Chemistry …, 2022 - pubs.rsc.org
Chalcopyrite CuInSe2 (CISe)-based thin-film photovoltaic solar cells have been attracting
attention since the 1970s. The technologies of CISe-based thin-film growth and device …

A review on atomic layer deposited buffer layers for Cu (In, Ga) Se2 (CIGS) thin film solar cells: Past, present, and future

S Sinha, DK Nandi, PS Pawar, SH Kim, J Heo - Solar Energy, 2020 - Elsevier
CIGS-based thin film solar cell (TFSC) technology is emerging as a promising contributor to
the solar photovoltaic industry next to the presently leading Si-based technology. Although …

Influence of Conduction Band Offset between Cu(In,Ga)Se2 Absorber and Zn1-xMgxO Buffer in Zn1-xMgxO:Al/Zn1-xMgxO/CdS/Cu(In,Ga)Se2 Solar Cell

J Chantana, B Ergashev, Y Kawano… - ACS Applied Energy …, 2023 - ACS Publications
Cu (In, Ga) Se2 (CIGSe) solar cells on soda-lime glass (SLG) substrates were fabricated
with the structure of Al/Ni/sputtered Zn0. 88Mg0. 12O: Al─ transparent conductive oxide …

Application of Two-Dimensional MoSe2 Atomic Layers to the Lift-Off Process for Producing Light-Weight and Flexible Bifacial Cu(In, Ga)Se2 Solar Cells

T Nishimura, N Hamada, J Chantana… - ACS Applied Energy …, 2020 - ACS Publications
The application of two-dimensional MoSe2 atomic layers to the lift-off process is proposed
for the preparation of light-weight and flexible bifacial Cu (In, Ga) Se2 (CIGS) solar cells. The …

Influence of Different Layers on Enhancing the PV Performance of Al/ZnO/ZnMnO/CIGSSe/Cu2O/Ni Solar Cells

S Sikder, R Hosen, MS Uddin, MM Haque, H Mamur… - Applied Solar …, 2024 - Springer
Abstract Copper Indium Gallium Sulfide Selenide (CIGSSe)-based solar cells, featuring
Al/ZnO/ZnMnO/CIGSSe/Cu2O/Ni layers, are optimized using the solar cell capacitance …

Silver-alloyed wide-gap CuGaSe2 solar cells

T Nishimura, A Doi, J Chantana, A Mavlonov… - Solar Energy, 2021 - Elsevier
Crystal growth promotion for CuGaSe 2 (CGSe) photovoltaic absorber by silver (Ag)-addition
is demonstrated, enhancing device performance for wide-gap CGSe solar cells. By …

Formation of Native Inx(O,S)y Buffer through Surface Oxidation of Cu(In,Ga)(S,Se)2 Absorber for Significantly Enhanced Conversion Efficiency of Flexible and Cd …

J Chantana, Y Kawano, T Nishimura, A Mavlonov… - Solar …, 2022 - Wiley Online Library
Herein, flexible, Cd‐free, and all‐dry process Cu (In, Ga)(S, Se) 2 (CIGSSe) solar cells on
stainless steel (SUS) substrates are developed with manufacturing CIGSSe absorbers …

Total band alignment in theoretical and experimental aspects for enhanced performance of flexible and Cd‐free Cu (In,Ga)(S,Se)2 solar cell fabricated by all‐dry …

J Chantana, Y Kawano, A Mavlonov… - Progress in …, 2023 - Wiley Online Library
Total band alignment parameters, which are CBO, ΔEC‐TA, and ΔEC‐TB values, in the Cu
(In, Ga)(S, Se) 2 (CIGSSe) solar cells are theoretically and experimentally optimized …

Numerical design and optimization of Sb2S3/SnS2 heterojunction solar cells: Performance analysis and insights

UU Rehman, RS Almufarij, EA Shokralla… - Materials Science and …, 2025 - Elsevier
This work introduces the numerical modeling of novel Sb 2 S 3/SnS 2 based heterojunction
solar cells using the SCAPS-1D. The designed solar cell configuration characterized by …

Sn1–xGexOy and Zn1–xGexOy by Atomic Layer Deposition─Growth Dynamics, Film Properties, and Compositional Tuning for Charge Selective Transport in (Ag,Cu …

A Hultqvist, J Keller, NM Martin, F Larsson… - ACS Applied Energy …, 2023 - ACS Publications
Two inorganic electron-selective layers (ESLs), Sn1–x Ge x O y (TGO) and Zn1–x Ge x O y
(ZGO), were developed by using atomic layer deposition (ALD) with in situ quartz crystal …