This article aimed at providing comprehensive information on the use of nanomaterial in
asphalt binder and mixes based on an exhaustive review of the literature. The complete …

This article presents a comparative review of the most commonly used nano-additives for
bituminous mixtures: nanoclays (NC), nanosilicates, carbon nanotubes (CNTs), graphene …

The limited cost-effective avenues available for recycling Polyethylene Terephthalate (PET),
widely used in packing bottled water, has turned it into a global environmental challenge. A …

This study investigates the effects of adding ethylene vinyl acetate (EVA) copolymer and
nanoclay (NC) on the high-temperature performance of asphalt binders. Three different …

Utilizing polymers for asphalt concrete (AC) mixture modification has many drawbacks that
hinder its wide implementations for roadway construction. Recently, research on employing …

Due to an increasing rate of traffic volume and truckloads in recent years, asphalt binders
are often modified with synthetic polymers to increase stiffness and sustain excessive heat …

The objective of this study was to evaluate and recommend an asphalt mixture design with
emerging additive technologies that would provide superior performance against asphalt …

In recent years, major initiatives have been taken to replace non-renewable materials with
environmentally friendly and sustainable ones. The present study was undertaken to apply a …

Styrene-butadiene rubber (SBR) is commonly used as a modifier to enhance the low-
temperature performance of asphalt. However, it is worth noting that while SBR modified …

In recent years, nanotechnology has sparked an interest in nanomodification of bituminous
materials to increase the viscosity of asphalt binders and improves the rutting and fatigue …