Materials corrosion for thermal energy storage systems in concentrated solar power plants
The current commercial deployment of concentrating solar power (CSP) relies on a system
of thermal energy storage (TES) for round the clock generation of electricity. The heat …
of thermal energy storage (TES) for round the clock generation of electricity. The heat …
[HTML][HTML] Review on the challenges of salt phase change materials for energy storage in concentrated solar power facilities
Abstract Concentrated Solar Thermal Power has an advantage over other renewable
technologies because it can provide 24-hour power availability through its integration with a …
technologies because it can provide 24-hour power availability through its integration with a …
Materials compatibility for the next generation of Concentrated Solar Power plants
M Sarvghad, SD Maher, D Collard, M Tassan… - Energy Storage …, 2018 - Elsevier
The next generation of Concentrated Solar Power (CSP) plants are expected to operate at
higher temperatures than those currently in use, for improved efficiency and reduced cost of …
higher temperatures than those currently in use, for improved efficiency and reduced cost of …
The effect of variable operating parameters for hydrocarbon fuel formation from CO2 by molten salts electrolysis
The emission of CO 2 has been increasing day by day by growing world population, which
resulted in the atmospheric and environmental destruction. Conventionally different …
resulted in the atmospheric and environmental destruction. Conventionally different …
[HTML][HTML] Laser-induced carbonization of stainless steel as a corrosion mitigation strategy for high-temperature molten salts applications
L González-Fernández, A Anagnostopoulos… - Journal of Energy …, 2022 - Elsevier
New heat transfer fluids are necessary to shift the operation temperature of concentrating
solar power plants (CSP) to higher temperatures. Ternary carbonate salts (Li 2 CO 3-K 2 CO …
solar power plants (CSP) to higher temperatures. Ternary carbonate salts (Li 2 CO 3-K 2 CO …
[HTML][HTML] A comprehensive review of the materials degradation phenomena in solid-liquid phase change materials for thermal energy storage
Abstract Phase Change Materials (PCMs) employ latent heat property for storage and
management of thermal energy in various applications. In order to ensure efficient …
management of thermal energy in various applications. In order to ensure efficient …
Hot corrosion behavior of NiCr-Cr3C2-CaF2/BaF2 composite coating with NiAl bond coating in molten NaCl-KCl and NaCl-Na2SO4 at 800℃
JH Wang, DG Li, TM Shao - Corrosion Science, 2022 - Elsevier
Abstract The NiCr-Cr 3 C 2-CaF 2/BaF 2 coating with the NiAl bond coating was sprayed on
a Ni16Cr13Co4Mo (wt%) alloy by detonation-gun spray, and hot corrosion behaviors were …
a Ni16Cr13Co4Mo (wt%) alloy by detonation-gun spray, and hot corrosion behaviors were …
Corrosion of stainless steel 316 in eutectic molten salts for thermal energy storage
Stainless steel 316 was examined for compatibility with the eutectic mixtures of NaCl+ Na 2
CO 3 and NaCl+ Na 2 SO 4 at 700° C and Li 2 CO 3+ K 2 CO 3+ Na 2 CO 3 at 450° C in air …
CO 3 and NaCl+ Na 2 SO 4 at 700° C and Li 2 CO 3+ K 2 CO 3+ Na 2 CO 3 at 450° C in air …
Inhibiting hot corrosion of molten Li2CO3-Na2CO3-K2CO3 salt through graphitization of construction materials for concentrated solar power
Next-generation concentrated solar power (CSP) plants are expected to work above the
current temperature limit of 565° C for the benefit of enhanced efficiency. This poses …
current temperature limit of 565° C for the benefit of enhanced efficiency. This poses …
Corrosion of steel alloys in eutectic NaCl+ Na2CO3 at 700 C and Li2CO3+ K2CO3+ Na2CO3 at 450 C for thermal energy storage
Stainless steel 316, duplex steel 2205 and carbon steel 1008 were examined for
compatibility with the eutectic mixtures of NaCl+ Na 2 CO 3 at 700° C and Li 2 CO 3+ K 2 CO …
compatibility with the eutectic mixtures of NaCl+ Na 2 CO 3 at 700° C and Li 2 CO 3+ K 2 CO …