Aerodynamic and thermodynamic analysis of an aero-engine pre-swirl system based on structure design and performance improvement

W Gong, G Liu, J Wang, F Wang, A Lin… - Aerospace Science and …, 2022 - Elsevier
As a vital part of the pre-swirl air supply system, the rotating receiver hole will affect the
cooling air quality supplied to turbine rotor blades of an aero-engine. It is concerned about …

Flow and performance of the disk cavity of a marine gas turbine at varying nozzle pressure and low rotation speeds: a numerical investigation

B Hu, Y Yao, M Wang, C Wang, Y Liu - Machines, 2023 - mdpi.com
In marine gas turbines, variations in rotational speed occur all the time. To ensure adequate
cooling effects on the turbine blades, the valves need to be adjusted to change the pressure …

[HTML][HTML] Theoretical and experimental evaluation of temperature drop and power consumption in a cover-plate pre-swirl system for gas turbine cooling

G Liu, W Gong, H Wu, L Pang, A Lin - Case Studies in Thermal Engineering, 2021 - Elsevier
The pre-swirl system has the ability to decrease the air supply temperature so as to improve
the cooling performance and the operating life for turbine rotating blade. In this paper, a test …

Computational fluid dynamics for turbomachinery internal air systems

JW Chew, NJ Hills - … transactions of the royal society A …, 2007 - royalsocietypublishing.org
Considerable progress in development and application of computational fluid dynamics
(CFD) for aeroengine internal flow systems has been made in recent years. CFD is regularly …

Numerical analysis of air supply parameters and non‐uniform characteristics in a cover‐plate pre‐swirl system with the adjustable flow path

Z Lei, G Liu - International Journal of Energy Research, 2021 - Wiley Online Library
The pre‐swirl system can transfer the cooling air from the compressor to the turbine rotor
blades with a lower relative total temperature to avoid extreme thermal shock. This work …

Measurement and analysis of aerodynamic and thermodynamic losses in pre-swirl system arrangements

C Bricaud, T Geis, K Dullenkopf… - … Expo: Power for …, 2007 - asmedigitalcollection.asme.org
In order to separately describe the dominating loss mechanisms in pre-swirled cooling air
delivery systems, discharge, temperature and velocity measurements were performed for …

Effect of pre-swirl nozzle closure modes on unsteady flow and heat transfer characteristics in a pre-swirl system of aero-engine

G Liu, Z Lei, A Lin, Q Feng… - Proceedings of the …, 2022 - journals.sagepub.com
The pre-swirl system is of great importance for temperature drop and cooling air supply. This
study aims to investigate the influencing mechanism of heat transfer, nonuniform …

An adjustable vane-shaped nozzle-based modulated pre-swirl system for gas turbine aero-engine: Structure parameters and aerodynamic performance analysis

C Liu, J Guo, C Wang, P Liu, S Ding - Applied Thermal Engineering, 2024 - Elsevier
The pre-swirl system of an aero engine provides cooling air with suitable temperature and
pressure for turbine blades, rarely contributing to thrust. However, the traditional pre-swirl …

CFD analysis of flow and heat transfer in a direct transfer preswirl system

U Javiya, JW Chew, NJ Hills, L Zhou, M Wilson… - 2012 - asmedigitalcollection.asme.org
The accuracy of computational fluid dynamics (CFD) for the prediction of flow and heat
transfer in a direct transfer preswirl system is assessed through a comparison of CFD results …

Physical interpretation of flow and heat transfer in preswirl systems

P Lewis, M Wilson, G Lock, JM Owen - 2007 - asmedigitalcollection.asme.org
This paper compares heat transfer measurements from a preswirl rotor–stator experiment
with three-dimensional (3D) steady-state results from a commercial computational fluid …