Effects of cryogenic treatment on microstructure and mechanical properties of AZ31 magnesium alloy rolled at different paths
In this study, the AZ31 Mg alloy sheets were fabricated by the traditional process of air
cooling after rolling and a new process of cryogenic treatment after rolling. The effect of …
cooling after rolling and a new process of cryogenic treatment after rolling. The effect of …
[HTML][HTML] The role of the Mg17Al12-phase in the high-pressure die-cast magnesium-aluminum alloy system
JP Weiler - Journal of Magnesium and Alloys, 2023 - Elsevier
Abstract The Mg 17 Al 12 β-phase is highly influential to the performance of magnesium-
aluminum high-pressure die-casting alloys. Numerous studies have investigated the effect of …
aluminum high-pressure die-casting alloys. Numerous studies have investigated the effect of …
Strengthening mechanisms of semi-coherent boundaries between Al8Mn4Y and the Mg matrix in magnesium alloys
Y Chen, Z Zhu, MA Siddiq, K Li, J Zhou - Materials Science and …, 2023 - Elsevier
Cracking at phase or grain boundaries has been demonstrated as the dominant failure
mode in Mg alloys, emphasizing the necessity for boundary enhancement to improve both …
mode in Mg alloys, emphasizing the necessity for boundary enhancement to improve both …
Effect of surface roughness induced by milling operation on the corrosion behavior of magnesium alloys
In this work, the effect of surface roughness, induced by milling operation, on the corrosion
properties of the as-cast AZ31 and the as-cast AZ80 magnesium alloys has been studied …
properties of the as-cast AZ31 and the as-cast AZ80 magnesium alloys has been studied …
Microstructures and mechanical properties of a Mg–9Gd− 3Y− 0.6 Zn− 0.4 Zr (wt.%) alloy modified by Y-rich misch metal
N Wang, Q Yang, X Li, K Guan, J Zhang, C Yao… - Materials Science and …, 2021 - Elsevier
Microstructural evolutions and mechanical properties of a Y-rich misch metal modified Mg–
9Gd− 3Y− 0.6 Zn− 0.4 Zr (wt.%) alloy were investigated. In the as-cast sample, the …
9Gd− 3Y− 0.6 Zn− 0.4 Zr (wt.%) alloy were investigated. In the as-cast sample, the …
[HTML][HTML] Investigation on microstructure and mechanical properties of hot-rolled AZ31 Mg alloy with various cryogenic treatments
AZ31 Mg alloy sheet, prepared by a novel process combining hot rolling and various
cryogenic treatments, has been investigated on its microstructure and mechanical …
cryogenic treatments, has been investigated on its microstructure and mechanical …
Comparative study on the stress corrosion cracking susceptibility of AZ80 and AZ31 magnesium alloys
The stress corrosion cracking (SCC) susceptibility of an as-cast AZ80 magnesium alloy was
evaluated using slow strain rate test (SSRT) in air and in 3.5% NaCl solution at various …
evaluated using slow strain rate test (SSRT) in air and in 3.5% NaCl solution at various …
[HTML][HTML] Eutectic solidification in Mg-9Al-0.7 Zn: From divorced to coupled growth
Abstract In hypoeutectic Mg-Al-based alloys, Mg 17 Al 12 forms in the last stages of
solidification by a eutectic reaction that is usually fully or partially divorced. Here we …
solidification by a eutectic reaction that is usually fully or partially divorced. Here we …
A study on the phase transformation of γ2-Al8Mn5 to LT-Al11Mn4 during solutionizing in AZ91 alloy
Abstract γ 2-Al 8 Mn 5 intermetallic particles are generally present in commercial Mg-Al-Zn
alloys. The present study is concerned with the effect of solutionizing on the morphology and …
alloys. The present study is concerned with the effect of solutionizing on the morphology and …
Effect of precipitate characteristics on the corrosion behavior of a AZ80 magnesium alloy
In this study, a systematic investigation on the effect of both aging temperature (250° C and
330° C) and time (chosen based on aging curves) on the distribution and volume fraction of …
330° C) and time (chosen based on aging curves) on the distribution and volume fraction of …