[HTML][HTML] Structural health monitoring of timber bridges–A review

F Abdoli, M Rashidi, J Wang, R Siddique, V Nasir - Results in Engineering, 2024 - Elsevier
Studies on structural health monitoring of timber bridges are limited. The unique
characteristics of timber, such as anisotropy, hygroscopicity, and high variability under …

Structural health monitoring of timber buildings: A literature survey

M Riggio, M Dilmaghani - Building Research & Information, 2020 - Taylor & Francis
In recent years, multiple historic and contemporary timber buildings have been instrumented
with sensors to monitor the performance of wood products and novel engineering systems …

Environmental response of a CLT floor panel: Lessons for moisture management and monitoring of mass timber buildings

EL Schmidt, M Riggio, AR Barbosa, I Mugabo - Building and Environment, 2019 - Elsevier
Cross-laminated timber (CLT) is becoming increasingly adopted into North American
construction, yet little is known about the impacts of environmental exposure (eg, to rain …

Monitoring moisture performance of cross-laminated timber building elements during construction

E Schmidt, M Riggio - Buildings, 2019 - mdpi.com
There are currently no standards regulating water management for mass timber elements
during construction, little knowledge of impacts of moisture exposure (wetting and drying …

Numerical hygro-thermal analysis of coated wooden bridge members exposed to Northern European climates

S Fortino, P Hradil, A Genoese, A Genoese… - … and Building Materials, 2019 - Elsevier
This work presents a numerical model to analyse the hygro-thermal behaviour of wooden
bridge members. A multi-Fickian hygro-thermal model, previously implemented by some of …

A feasibility study on timber moisture monitoring using piezoceramic transducer-enabled active sensing

J Zhang, Y Li, Y Huang, J Jiang, SCM Ho - Sensors, 2018 - mdpi.com
In recent years, the piezoceramic transducer-enabled active sensing technique has been
extensively applied to structural damage detection and health monitoring, in civil …

Investigation of electrical characteristics using various electrodes for evaluating the moisture content in wood.

SW Hwang, SY Hwang, T Lee, KS Ahn… - …, 2021 - search.ebscohost.com
Electrical resistance and resistivity were measured with various types of electrodes to
evaluate the moisture content of wood. The conventional two-pin method, electrically …

Monitoring of moisture and dimensional behaviors of nail-laminated timber (NLT)-concrete slab exposed to outdoor air

S Hwang, H Chung, T Lee, KS Ahn, S Pang… - Journal of the Korean …, 2022 - woodj.org
The moisture and dimensional behaviors of a nail-laminated timber (NLT)–concrete slab
composed of an NLT–plywood composite and topping concrete are monitored for 385 days …

Durability study of glulam timber under cyclic moisture loading

P Uwizeyimana, M Perrin, E Laügt, F Eyma - Construction and Building …, 2022 - Elsevier
Glulam timber is currently an interesting solution for building environmentally friendly and
mechanically strong structures. However, little is known about the impact of Wetting/Drying …

Assessment of moisture content profile in Douglas-fir wood using electrical resistivity-based tomography

W Hafsa, TA Nguyen, N Angellier, L Ulmet… - … and Building Materials, 2023 - Elsevier
The service life and the durability of wood-based structures is closely related to the moisture
content of the material. In order to establish an optimal and reliable evaluation of the …