The flux assisted GTAW or A-TIG process developed at the Paton Welding Institute in 1960.
Despite capable of offering a penetration up to 5–6 mm in a single pass weld, it could not …

The paper describes processes of metal parts edges deburring and surface of metal
samples polishing with ceramic tools based on fibre aluminium oxide. It presents the …

The paper presents an innovatory low-energy detonation-spraying method suitable for the
metallization of ceramic materials, in which the energy necessary for joining the metallic …

In This research increasing oxidation resistance of YSZ coated Hastelloy X by surface
remelting was the main goal. Tungsten Inert Gas Welding (TIG) process was used to melt …

The use of remelting as heat treatment for metallic components has grown on an industrial
scale, particularly in sectors where surface hardness is a requirement. Using a conventional …

Herein, an FeCrBSi coating was fabricated via plasma spray on AISI1045 steel, and
subsequently, a gas tungsten arc welding (GTA) process was employed to remelt the …

The paper describes processes of edge deburring and surface polishing with ceramic tools
based on aluminium oxide. It presents the construction of basic types of tools and their …

Abstract 7075 aluminum alloy in the T6 state was subjected to surface remelting treatment
using Gas Tungsten Arc Welding (GTAW). The changes in the material microstructure were …

Tungsten inert gas arc (TIG) process was employed to remelt Fe-based coating deposited by
plasma spraying. Subsequently, the microstructure, interface, and the wear resistance of the …

The purpose of this paper is to study the effect of cutting tool surface geometry and the
atomization-based cutting fluid (ACF) spray parameters on the characteristics of the thin film …