[HTML][HTML] Microstructure evolution of annealed 7075 aluminum alloy and its influence on room-temperature plasticity
L Hua, X Hu, X Han - Materials & Design, 2020 - Elsevier
Compared to hot forming, cold forming can manufacture components with higher accuracy
and better mechanical properties. However, for some light-weight and high-strength …
and better mechanical properties. However, for some light-weight and high-strength …
Investigation of initial metallurgical factors on the dynamic impact response and adiabatic shear bands formation of the 6061 Al alloy
The effect of multi-pass friction stir processing and initial base metal condition on the
dynamic impact response of AA6061-T6 alloy at high strain rates was investigated in this …
dynamic impact response of AA6061-T6 alloy at high strain rates was investigated in this …
Multiple strengthening sources and adiabatic shear banding during high strain-rate deformation of AISI 321 austenitic stainless steel: Effects of grain size and strain …
The dynamic impact response of AISI 321 steel at strain rate of 4000, 5500, 6500 and 7500
s− 1 was investigated using the split Hopkinson pressure bar system. The alloy samples …
s− 1 was investigated using the split Hopkinson pressure bar system. The alloy samples …
Dynamic compressive behaviour of selective laser melted AlSi12 alloy: Effect of elevated temperature and heat treatment
Abstract Selective Laser Melting (SLM) is a near net shaped additive manufacturing process.
Parts processed by SLM can experience dynamic loading and high temperature in service …
Parts processed by SLM can experience dynamic loading and high temperature in service …
High Strain Behaviour of Ultrafine‑grained Aluminium Alloys Processed Through the Severe Plastic Deformation Techniques: A Review
In the present study, the various literature based on the high strain rate behaviour of the
ultrafine-grained (UFG) aluminium alloys produced through severe plastic deformation …
ultrafine-grained (UFG) aluminium alloys produced through severe plastic deformation …
Effects of process parameters and loading direction on the impact strength of additively manufactured 18% Ni-M350 maraging steel under dynamic impact loading
The microstructural and damage evolution of 18% Ni M350 maraging steel fabricated by
laser-based directed energy deposition (DED) process under dynamic impact loading are …
laser-based directed energy deposition (DED) process under dynamic impact loading are …
Development of adiabatic shearing bands in 7003-T4 aluminum alloy under high strain rate impacting
X Wu, L Li, W Liu, S Li, L Zhang, H He - Materials Science and Engineering …, 2018 - Elsevier
This study details an investigation about the formation and development of adiabatic
shearing bands (ASB) in 7003-T4 aluminum alloy under high strain rate impacting. The …
shearing bands (ASB) in 7003-T4 aluminum alloy under high strain rate impacting. The …
Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain
X Ji, B Guo, F Jiang, H Yu, D Fu, J Teng… - Journal of Materials …, 2020 - Elsevier
The flow softening is an important phenomenon during hot deformation of metallic materials.
In the present work, a more evident flow softening of Ti-6Al-4V alloy when deformed in two …
In the present work, a more evident flow softening of Ti-6Al-4V alloy when deformed in two …
Grain structure and precipitate variations in 7003-T6 aluminum alloys associated with high strain rate deformation
H He, X Wu, C Sun, L Li - Materials Science and Engineering: A, 2019 - Elsevier
The variation of the grain and precipitate structure plays a rather important role on the
response of the 7003-T6 Al-Zn-Mg-Cu alloys to high speed deformation but related reports …
response of the 7003-T6 Al-Zn-Mg-Cu alloys to high speed deformation but related reports …
Hypervelocity impact response of CFRP laminates using smoothed particle hydrodynamics method: Implementation and validation
E Giannaros, A Kotzakolios, V Kostopoulos… - International Journal of …, 2019 - Elsevier
The current work investigates the hypervelocity impact response (HVI) of carbon fiber
reinforced polymer composites (CFRP) and the produced secondary debris using smoothed …
reinforced polymer composites (CFRP) and the produced secondary debris using smoothed …