The microstructure of AZ31 magnesium alloy was modified by Ca addition. AZ31-Ca alloys
with refined microstructure exhibited significantly enhanced corrosion resistance in artificial …

The microstructures and corrosion resistance of magnesium–5 wt% aluminum–0.3 wt%
manganese alloys (Mg–Al–Mn) with different Ca additions (0.2–4 wt%) were investigated …

A polypyrrole (PPy) and stearic acid (SA)-based superhydrophobic coating was developed
to improve the corrosion behavior of squeeze cast Mg-1.0 wt% Sr-1.0 wt% Y-0.6 wt% Ca-0.5 …

The corrosion behaviours of commercial AZ91D alloy and Ca–Y-containing AZ91 alloy,
fabricated by casting, were evaluated, and their microstructural changes and surface …

Abstract The Mg 17 Al 12 β-phase is highly influential to the performance of magnesium-
aluminum high-pressure die-casting alloys. Numerous studies have investigated the effect of …

Abstract The Mg-Al-Ca system has been shown to be a promising alloy system since it
combines the low density of Mg with a high creep resistance at high alloying contents and a …

The effect of Ca additions on the microstructure and corrosion resistance of Mg–9Al and Mg–
9Al-0.5 Mn alloys is investigated. Model alloys were used instead of a commercial AZ91 …

In this study, the effects of calcium (Ca) and yttrium (Y) on the microstructure, mechanical
properties, corrosion behaviour and biocompatibility of magnesium (Mg) alloys, ie Mg–x Ca …

The corrosion behavior of Mg-7Nd and Mg-10Y binary alloys were investigated through
scanning electron microscope observation, hydrogen evolution, weight loss experiment and …

Mg-Al-Ca-Mn alloys with Ca/Al≥ 1 of AX33, AX44, and AX55 were prepared by combining
three processes of water-cooling semi-continuous cast, homogenization heat treatment, and …