[HTML][HTML] Thin-ply polymer composite materials: A review
The introduction of the spread-tow thin-ply technology enabled the development of
composite plies as thin as 0.020 mm. The availability of composite plies with a broader …
composite plies as thin as 0.020 mm. The availability of composite plies with a broader …
Translaminar fracture toughness testing of composites: A review
A comprehensive review of techniques for the experimental characterisation of the fracture
toughness associated with the translaminar (fibre-breaking) failure modes of continuously …
toughness associated with the translaminar (fibre-breaking) failure modes of continuously …
A peridynamic material model for the analysis of dynamic crack propagation in orthotropic media
M Ghajari, L Iannucci, P Curtis - Computer Methods in Applied Mechanics …, 2014 - Elsevier
A new material model for the dynamic fracture analysis of anisotropic materials has been
proposed within the framework of the bond-based peridynamic theory. This model enables …
proposed within the framework of the bond-based peridynamic theory. This model enables …
Progressive damage modeling of open-hole composite laminates under compression
Despite the recent success of modeling progressive damage of open-hole fiber reinforced
composites subjected to tension (OHT), it is still a challenging task to predict the strengths …
composites subjected to tension (OHT), it is still a challenging task to predict the strengths …
Intraply fracture of fiber-reinforced composites: Microscopic mechanisms and modeling
The fracture behavior parallel to the fibers of an E-glass/epoxy unidirectional laminate was
studied by means of three-point tests on notched beams. Selected tests were carried out …
studied by means of three-point tests on notched beams. Selected tests were carried out …
Measurement of resistance curves in the longitudinal failure of composites using digital image correlation
This paper presents a new methodology to measure the crack resistance curves associated
with fiber-dominated failure modes in polymer–matrix composites. The crack resistance …
with fiber-dominated failure modes in polymer–matrix composites. The crack resistance …
[HTML][HTML] Numerical analysis of size effects on open-hole tensile composite laminates
The tensile strength of open-hole fibre reinforced composite laminates depends on in-plane,
thickness and ply lay-up scaling. Translaminar (fibre direction) mode I fracture toughness …
thickness and ply lay-up scaling. Translaminar (fibre direction) mode I fracture toughness …
Progressive failure analysis of 2D woven composites at the meso-micro scale
This paper presents a multi-scale progressive damage modeling strategy to investigate the
damage and failure behaviors of 2D woven composites. The micro-scale and meso-scale …
damage and failure behaviors of 2D woven composites. The micro-scale and meso-scale …
Experimental and multiscale numerical investigation on failure behavior of satin woven carbon/carbon composites subjected to pin-loading
Y Zhang, Z Zhou - International Journal of Mechanical Sciences, 2022 - Elsevier
Composite mechanical joints are extensively used and becoming crucial components for
primary and secondary structures in industry. Considerable efforts have been contributed to …
primary and secondary structures in industry. Considerable efforts have been contributed to …
Engineering the translaminar fracture behaviour of thin-ply composites
Bio-inspired patterns of micro-cuts perpendicular to the fibre direction in thin-ply CFRP
laminates have been used to increase the translaminar fracture toughness of the material …
laminates have been used to increase the translaminar fracture toughness of the material …