Bioceramic composites for orthopaedic applications: A comprehensive review of mechanical, biological, and microstructural properties
Bioceramics have been widely utilized for orthopaedic applications in which the
biocompatibility and mechanical properties of the materials are vital characteristics to be …
biocompatibility and mechanical properties of the materials are vital characteristics to be …
Synthesis, characterization, and bioactivity investigation of biomimetic biodegradable PLA scaffold fabricated by fused filament fabrication process
Nowadays polylactic acid (PLA) is widely used in orthopedics surgeries as implants material
due to well mechanical characterization and biomedical properties. But the PLA implants …
due to well mechanical characterization and biomedical properties. But the PLA implants …
[HTML][HTML] Physico-mechanical, microstructure, and chemical properties of Si/Ti/Nb additions to CoCrMoW medium entropy alloys
LZ Mohamed, AH Elsayed, OA Elkady… - journal of materials …, 2023 - Elsevier
Abstract CoCrMoWSi, CoCrMoWTi, and CoCrMoWNb medium entropy alloys (MEAs) were
manufactured by powder metallurgy technique. The MEAs were sintered in a vacuum …
manufactured by powder metallurgy technique. The MEAs were sintered in a vacuum …
Preliminary evaluations on development of recycled porcelain reinforced LM-26/Al-Si10Cu3Mg1 alloy for piston materials
The current work deals with an endeavor to synthesis, metal composites by taking aluminum
alloy (ie LM 26) as matrix material and porcelain (powder form) as reinforcement. The metal …
alloy (ie LM 26) as matrix material and porcelain (powder form) as reinforcement. The metal …
Effect of ceramic reinforcement on physical and mechanical behaviour of AL6061 metal matrix composites fabricated using stir casting technique
The influence of n-ZrO2 particles addition on the microstructural and mechanical properties
of the Al6061 composites was examined. Mechanical alloying was used to mix the ceramic …
of the Al6061 composites was examined. Mechanical alloying was used to mix the ceramic …
Contact stress and wear analysis of zirconia against alumina for normal and physically demanding loads in hip prosthesis
Risky gait activities lead to severe wear in orthopaedic implants during postoperative
periods. The aim of the present study is to predict the linear and volumetric wear of zirconia …
periods. The aim of the present study is to predict the linear and volumetric wear of zirconia …
Tribo-behaviour of biomaterials for hip arthroplasty
Generation of wear particulates in articulating bearings must be minimized in order to
increase its durability. This paper gives a succinct introduction of the multidisciplinary area of …
increase its durability. This paper gives a succinct introduction of the multidisciplinary area of …
Optimum selection of novel developed implant material using hybrid entropy‐PROMETHEE approach
Optimum selection of appropriate biomaterial with unlike properties for the femoral head
material is one of the toughest tasks. Therefore, in this article, a series of implant materials …
material is one of the toughest tasks. Therefore, in this article, a series of implant materials …
Surface nano-modification by ion beam–assisted deposition alters the expression of osteogenic genes in osteoblasts
R Miralami, H Haider, JG Sharp… - Proceedings of the …, 2019 - journals.sagepub.com
Biomaterials with enhanced biocompatibility are favored in implant studies to improve the
outcomes of total joint replacement surgeries. This study tested the hypothesis that nano …
outcomes of total joint replacement surgeries. This study tested the hypothesis that nano …
Tribological performance of ceramic composites for biomedical applications: A review
Understanding the wear mechanisms of a material subjected to varying loading conditions
in various applications is a key to improve the overall performance of the material. Ceramic …
in various applications is a key to improve the overall performance of the material. Ceramic …