The effects of dynamic and post‐dynamic recrystallization (DRX and post‐DRX) on the
microstructure and mechanical properties of austenitic stainless steels are critically …

We investigate the effect of grain size and grain orientation on deformation twinning in a Fe–
22wt.% Mn–0.6 wt.% C TWIP steel using microstructure observations by electron channeling …

The alloy design for high-nitrogen duplex stainless steels (DSSs) has been received
ascendant attentions due to their excellent strength, ductility and anticorrosion. However, the …

The correlation between stacking fault energy (SFE) and deformation microstructure of high-
interstitial-alloyed austenitic Fe–18Cr–10Mn–(N or N+ C) alloys was investigated. As the …

Specimens of a CoCrFeMnNi high entropy alloy with different content of nitrogen (0.5–2.0
at.%) were prepared by induction melting. Microstructure and tensile mechanical behavior of …

A FeCoCrNiMo 0.23 high entropy alloy was processed by powder metallurgy with two
conditions: hot extruded and annealed. In situ neutron diffraction, together with electron …

The stacking-fault energy (SFE), dislocation slip, mechanical twinning, strain hardening, and
yield and tensile strengths were systemically investigated in Fe–18Mn–0.6 C–1.5 Si …

The influence of grain size on the twinning stress of an Fe–15Mn–2Al–2Si–0.7 C Twinning
Induced Plasticity (TWIP) steel has been investigated. Five grain sizes were obtained using …

Seven stable austenitic steels (stable with respect to γ→ α′ transformation at room
temperature) of different alloy compositions (18Cr–12.5 Ni, 18Cr–35Ni, 18Cr–8Ni–6Mn …

The microstructural evolution of an S304H steel during bar rolling to a strain of 4 and
subsequent annealing as well as its effect on the mechanical properties were investigated …