A review of stress concentration studies on fibre composite panels with holes/cutouts

SA Kumar, R Rajesh… - Proceedings of the …, 2020 - journals.sagepub.com
Composite panels are widely used as structural members due to their high strength-to-
weight ratio. In order to reduce further weight, cutouts or notches are introduced in these …

Implementing functionally graded fibers technique to enhance pinned-joint performance in cross-ply laminate polymeric composites

M Taimour, AA Abd-Elhady, HEDM Sallam… - Composite …, 2023 - Elsevier
There are several techniques for improving the bearing performance of laminated
composites, such as metal-bonded inserts, steered fiber, nano-reinforcements of the matrix …

Fastener effects on mechanical behaviors of double-lap composite joints

T Qin, L Zhao, J Zhang - Composite Structures, 2013 - Elsevier
Experimental and numerical studies were carried out to reveal the effect mechanisms of
different fasteners on mechanical behaviors of composite bolted joints. Double-lap …

[HTML][HTML] An interpretation of the load distributions in highly torqued single-lap composite bolted joints with bolt-hole clearances

F Liu, X Lu, L Zhao, J Zhang, N Hu, J Xu - Composites Part B: Engineering, 2018 - Elsevier
A detailed interpretation of load distribution in composite single-lap bolted joints is
presented based on theoretical, experimental and numerical investigations. Modified …

Progressive failure analysis of glass–epoxy laminated composite pinned-joints

A Öndürücü, Ü Esendemir, RF Tunay - Materials & Design (1980-2015), 2012 - Elsevier
In this paper, the damage development process of glass–epoxy laminated composite pinned-
joints is investigated. To determine the effects of joint geometry and stacking sequence on …

Effects of geometric parameters on the failure behavior of mechanically fastened chopped carbon fiber tape reinforced thermoplastics

L Meng, Y Wan, I Ohsawa, J Takahashi - Composite Structures, 2019 - Elsevier
In the present study, the failure characteristics of mechanically fastened ultra-thin chopped
carbon fiber tape reinforced thermoplastics (UT-CTT) have been investigated. Failure …

[PDF][PDF] Effects of using different metal materials on stresses in metal-composite hybrid joints

F Sen, K Aldaş - Cankaya University Journal of Science and …, 2010 - dergipark.org.tr
The aim of this study is to investigate effects on stresses of using different adherent material
in metal-composite hybrid joints. It was assumed that a composite plate was adhesively …

[PDF][PDF] 复合材料层合板机械连接研究进展

尹玉, 李小强, 李东升, 王亮, 翟雨农 - 航空制造技术, 2016 - amte.net.cn
机械连接因其可靠性以及连接工艺上的优势, 受到学者和工程界的高度重视.
当前国内外学者对机械连接的研究主要是进行数值模拟与试验研究. 接头的承载强度 …

Stress analysis of hybrid joints of metal and composite plates via 3D-FEM

K Aldaş, F Şen - 2013 - acikerisim.aksaray.edu.tr
Three-dimensional finite element models are developed to investigate the effects of both
tensile load and uniform temperature load on the stresses in hybrid joints. During the …

Numerical Investigation of Member Stiffness in Composite Sandwich Bolted Connections

O Soukaina, M Hamid, H Bachir - Strength of Materials, 2023 - Springer
Member stiffness in bolted connections has been widely studied for homogenous and
isotropic materials contrary to composite sandwich ones. Therefore, a numerical simulation …