In this study, a substitute boriding powder including boric acid as boron source was
prepared and employed for boronizing of SAE 1020 steel. The boronizing processes were …

Development of cost-effective and efficient oxygen-evolution electrocatalysts is urgently
required for exploring renewable hydrogen energy and realizing large scale water splitting …

In this study, an alternative powder-pack boriding mixture containing H 3 BO 3 as boron
source was prepared and used for boriding of SAE 1020 steel. The boriding treatment was …

In this study, adhesion properties of boride layers formed on the surface of AISI 52100, AISI
5140, AISI 440C, AISI 420 and AISI 304 steels were investigated. Boronizing treatment was …

Boriding on steels is an outstanding surface hardening technique widely used to improve
the hardness, resistance to wear, corrosion, and oxidation. However, borided steels exhibit …

The AISI T1 steel was hardened by the solid boriding process in the temperature range 1123–
1273 K for a time duration of 2 to 8 h. A kinetic model, based on the integral method, was …

In the current study, the powder-pack boriding was applied to the AISI 12L14 steel in the
temperature range 1123 K to 1273 K for an exposure time between 2 and 8 hours. The …

In this study, three different types of stainless steels, AISI 304, AISI 420, and AISI 430 were
pack borided under 850° C–925° C–1000° C for 2, 4, and 6 h, respectively. Morphologies of …

An indispensable tool to choose the suitable process parameters for obtaining boride layer
of an adequate thickness is the modeling of the boriding kinetics. In this work, two …

In the present work, two mathematical diffusion models have been used to estimate the
growth of the iron monoboride and diiron boride coating formed on AISI 420 steel. The …