Process optimization and effect of sputtering pressure on electrochromic properties of flexible WO3 films prepared by DC magnetron sputtering
H Ma, Y Chen, N Li, C Tan, Y Rong, H Chen… - Physica B: Condensed …, 2023 - Elsevier
In this study, WO 3 films were prepared on flexible indium tin oxide/polyethylene
terephthalate substrates through DC magnetron sputtering at approximately 40° C, and the …
terephthalate substrates through DC magnetron sputtering at approximately 40° C, and the …
[HTML][HTML] Supercritical carbon dioxide-assisted platinum metallization of polyethylene terephthalate textile toward wearable device
Platinum metallization of polyethylene terephthalate (PET) textile is realized by a
supercritical carbon dioxide catalyzation process using palladium (II) …
supercritical carbon dioxide catalyzation process using palladium (II) …
Analysis of Ag-DP25/PET plasmonic nano-composites as a visible-light photocatalyst for wastewater treatment: Experimental/theoretical studies, and the DFT-MB …
The development of polymeric-composites Agx% DP25-PET (x= 0, 1, 2, 3) may significantly
boost the potential application of Agx% DP25 (x= 0, 1, 2, 3) photocatalytic powders …
boost the potential application of Agx% DP25 (x= 0, 1, 2, 3) photocatalytic powders …
Metallization of 3D-printed UV photopolymer structures by the incorporation of Pd-decorated carbon nanotubes
Pd-decorated carbon nanotube (CNT) nanocomposites were added to a UV photopolymer
resin to be used as the ink in the printing of three-dimensional (3D) structures. The …
resin to be used as the ink in the printing of three-dimensional (3D) structures. The …
Platinum metallization of polyethylene terephthalate by supercritical carbon dioxide catalyzation and the tensile fracture strength
Polyethylene terephthalate (PET) is known to be highly inert, and this makes it difficult to be
metallized. In addition, Pt electroless plating is rarely reported in the metallization of …
metallized. In addition, Pt electroless plating is rarely reported in the metallization of …
[HTML][HTML] Metallization of polyetherimide with 3D structures by supercritical carbon dioxide-assisted electroless NiP plating
Abstract Polyetherimide (PEI) with 3-dimensional (3D) structures is a promising material for
applications in electronic devices because of its numerous attractive properties. In the …
applications in electronic devices because of its numerous attractive properties. In the …
Evaluation of packaging systems with O2-absorbers on quality of minimally processed soybean sprouts
KC Cantelli, MC Carrão-Panizzi… - Food Science and …, 2023 - journals.sagepub.com
This study evaluated the influence of O2-absorbing sachets into different packages
polyethylene terephthalate (PET–E1), low density polyethylene (LDPE–E2), and PET/LDPE …
polyethylene terephthalate (PET–E1), low density polyethylene (LDPE–E2), and PET/LDPE …
Supercritical carbon dioxide-assisted gold metallization of 3D-printed structure and the tensile strength
Gold metallization of 3D printed polymer structures was conducted by a supercritical carbon
dioxide (sc-CO2) assisted electroless plating process. Precursor of the Pd catalyst utilized in …
dioxide (sc-CO2) assisted electroless plating process. Precursor of the Pd catalyst utilized in …