Products derived from trees have been used by mankind for thousands of years, where
timber has a long tradition as an ecological construction material. There is currently an …

The demolition sector generates a large amount of timber waste that could be directly
reused or recycled in other products for structural purposes. Timber should be graded before …

In mass timber construction, cross-laminated timber (CLT) and glued-laminated timber (GLT)
usually build a load-bearing system together. Exploring the mechanical properties of CLT …

The CLT-concrete composite (CCC) solution is appealing since it possesses many
advantages of a timber-concrete composite flooring system with a small thickness. However …

This study aimed to evaluate the physical and mechanical properties of cross-laminated
timber (CLT) characteristics from mangium (Acacia mangium) and puspa (Schima wallichii) …

Combined out-of-plane bending and compression is an inevitable loading condition for
cross-laminated timber (CLT) walls due to the out of plumbness, initial panel curvature and …

The purpose of this study was to evaluate the characteristic of cross-laminated timber (CLT)
made from puspa (Schima wallichii) wood, coconut (Cocos nucifera) trunk, and their …

Transverse modal analysis of timber panels is a proven effective alternative method for
approximating a material's elastic constants. Specific testing configurations, such as …

Rolling shear, an inherent property of cross-laminated timber (CLT) due to the weak shear
strength of cross layers, is always the determinant of load-bearing capacity for short-span …

The use of cross-laminated timber panels (CLT) made of low-grade structural timber has
steadily increased in developing countries. These panels usually present several natural …