For alloys that experience solid-state phase transformation upon cooling, the absence of as-
solidified chemical segregation information makes the elimination of hot cracking …

Custom 465 precipitation-hardened stainless steel was subjected to various thermal
treatments and then evaluated using tensile testing with a slow strain rate after …

The trapping behavior of hydrogen in a Fe-Cr-Ni-Al-Mo alloy (PH13–8Mo martensitic
stainless steel) was investigated. Three different metallurgical states of the same alloy were …

The influence of electrochemical charging of hydrogen at j=− 5 mA/cm 2 for 6, 12, 48 and 96
h on the structural and the mechanical behavior of wrought and electron beam melting …

The current study investigates the influence of pre-strain (un-strained, 3%, and 6%
engineering strain) and in-situ tensile stress (50%, 110%, and 125% of the yield stress (YS)) …

The hydrogen behavior in electrochemically charged electron beam melting (EBM) and
wrought Ti–6Al–4V alloys with a similar β-phase content of~ 6 wt% was compared …

Additive manufacturing attracts much interest for manufacturing and repair of structural parts
for the aerospace industry. This paper presents comparative characterization of aircraft items …

Abstract Ti-6Al-4V is one of the most widely used titanium alloys. However, it is susceptible
to hydrogen embrittlement, eg due to hydride formation. Hydrogen permeability through Ti …

Thermal decomposition of titanium hydrides in electrochemically hydrogenated electron
beam melting (EBM) and wrought Ti–6Al–4V alloys containing 6 wt% β is compared …

A systematic investigation of the evolution of martensitic microstructure, micro-texture, and
austenite stability followed by correlation with hardness was carried out as a function of prior …