Abstract AZ31B Mg/5052 Al laminated composite sheet with superior mechanical property
and good sheet shape was fabricated by novel corrugated roll/flat roll corrugating rolling and …

In this study, aluminium sheets were processed through 8 cycles of accumulative roll
bonding (ARB), and then, were annealed at 300° C for different time periods to maintain the …

In this research, the microstructure, texture, and work hardening behavior of the Al/IF
composite were investigated. The composites were produced through up to 7 cycles of …

To understand the differences between the microstructure and stress states owing to
uncoordinated deformation in different regions of a Cu–Al contact interface, the normal …

Abstract The multilayered Brass/IFS/Brass composite was produced through the cold roll
bonding (CRB) process and was then subjected to annealing treatments at different …

The microstructure, texture, and mechanical properties of the Al/Ni/Cu composite during
various accumulative roll bonding (ARB) cycles were studied using optical microscopy …

This study investigates the annealing effect on the tensile properties of aluminium
(Al)/copper (Cu)/nickel (Ni)(powder) composite fabricated utilising the accumulative roll …

In the present study, the effect of different accumulative roll bonding (ARB) process routes
was investigated on microstructure and mechanical properties for commercially pure copper …

In this research, three-layered brass/IF steel/brass composite was manufactured using the
cold roll bonding (CRB) process and its mechanical properties and corrosion behavior were …

استفاده از نورد سرد، یکی از روش‌های تولید ورق‌های چندلایه فلزی است. مزایای این روش نسبت به
دیگر روش‌های تولید ورق چندلایه، باعث گستردگی استفاده از آن در سال‌های اخیر شده است. وجود …‎