Electrospun polyimide nanofibers and their applications
Aromatic polyimides (PIs) are high-performance polymers with rigid heterocyclic imide rings
and aromatic benzene rings in their macromolecular backbones. Owing to excellent …
and aromatic benzene rings in their macromolecular backbones. Owing to excellent …
[HTML][HTML] Heterogeneous silica-polyimide aerogel-in-aerogel nanocomposites
Polymer aerogels are a promising, non-brittle alternative to silica aerogel, but are limited by
their very poor high-temperature stability. Polyimide is widely known for its high heat …
their very poor high-temperature stability. Polyimide is widely known for its high heat …
The Recent Advances of Polymer–POSS Nanocomposites With Low Dielectric Constant
L Miao, L Zhan, S Liao, Y Li, T He, S Yin… - Macromolecular …, 2024 - Wiley Online Library
This study provides a comprehensive overview of the preparation methods for polyhedral
oligomeric silsesquioxane (POSS) monomers and polymer/POSS nanocomposites. It …
oligomeric silsesquioxane (POSS) monomers and polymer/POSS nanocomposites. It …
Preparation and properties of polyimide/aluminum nitride composites
SH Xie, BK Zhu, JB Li, XZ Wei, ZK Xu - Polymer testing, 2004 - Elsevier
Polyimide/aluminum nitride (AlN) composites based on pyromellitic dianhydride (PMDA)
and 4, 4′-oxydianiline (ODA) were prepared by in situ polymerization. To disperse the AlN …
and 4, 4′-oxydianiline (ODA) were prepared by in situ polymerization. To disperse the AlN …
Dielectric properties of low-loss polymers for mmW and THz applications
We present a systematic characterization of dielectric permittivity of 6 commonly used, low-
loss polymers namely polystyrene, parylene, polyimide, SLA resin, SU-8, and SUEX for the …
loss polymers namely polystyrene, parylene, polyimide, SLA resin, SU-8, and SUEX for the …
Low percolation transitions in carbon nanotube networks dispersed in a polymer matrix: dielectric properties, simulations and experiments
The low concentration behaviour and the increase of the dielectric constant in carbon
nanotubes/polymer nanocomposites near the percolation threshold are still not well …
nanotubes/polymer nanocomposites near the percolation threshold are still not well …
Polyimide hollow glass microspheres composite films with low dielectric constant and excellent thermal performance
X Cao, J Wen, L Song, X Liu… - Journal of Applied Polymer …, 2021 - Wiley Online Library
Nowadays, polyimide (PI) with low dielectric constant is expected to be widely applied in
microelectronics. For this reason, hollow glass microspheres (HGM) modified by silane …
microelectronics. For this reason, hollow glass microspheres (HGM) modified by silane …
Optical fiber Fabry–Perot humidity sensor based on polyimide membrane: Sensitivity and adsorption kinetics
Y Zhao, Y Yuan, W Gan, M Yang - Sensors and Actuators A: Physical, 2018 - Elsevier
Abstract An optical fiber Fabry–Perot humidity sensor was constructed by coating a foamed
polyimide (PI) membrane on the end of a multimode fiber. This sensor had a sensitivity of …
polyimide (PI) membrane on the end of a multimode fiber. This sensor had a sensitivity of …
Fluorinated polyimide nanocomposites for low K dielectric applications
S Kurinchyselvan, A Hariharan, P Prabunathan… - Journal of Polymer …, 2019 - Springer
A novel fluorinated amine compound prepared was characterized by 1 H NMR, 19 F NMR
and FTIR. Subsequently, polymerized with pyromellitic dianhydride results in the formation …
and FTIR. Subsequently, polymerized with pyromellitic dianhydride results in the formation …
A methodology for the preparation of nanoporous polyimide films with low dielectric constants
L Jiang, J Liu, D Wu, H Li, R Jin - Thin Solid Films, 2006 - Elsevier
A method to generate nanoporous polyimide films with low dielectric constants was
proposed. The preparation consisted of two steps. Firstly, a polyimide/silica hybrid film was …
proposed. The preparation consisted of two steps. Firstly, a polyimide/silica hybrid film was …