Metallic alloys are, by essence, ductile and stiff and can support loads without sudden
rupture. This ductility becomes a disadvantage when applications require wear resistance …

The nitriding mechanisms of conventional DC plasma treatments have been extensively
studied and discussed, but no general agreement has been reached thus far. The sputtering …

Cylindrical samples of 1020 steel and 316 stainless steel were nitrided under the conditions
by conventional dc plasma nitriding (DCPN) and by a new technique denominate cathodic …

The influence of treatment pressure on the characteristics of the modified surface layers
produced by low-temperature dc glow discharge nitriding on AISI 316L austenitic stainless …

The influence of DC-pulsed plasma nitriding time on the surface properties of AISI 4140 low-
alloy steel has been investigated. The samples were nitrided in an industrial equipment …

Beam-assisted deposition of wear-resistant coatings on complex shaped dielectric products
is used as a source of slow metal atoms and fast gas molecules with coinciding trajectories …

Deposition of thin metallic films on dielectric substrates using a source of metal atom flow
combined with a flow fast argon atoms has been investigated and the investigation results …

Wear behavior of quenched-tempered AISI M2 tool steel samples has been studied after
plasma nitriding at different N 2–H 2 plasma gas flows containing 25, 50 and 75 sccm N 2 …

Experiments were performed with an aim of studying an effect of initial surface roughness
with different gas compositions in plasma nitriding, using pulse DC glow discharge plasma …

Plasma nitriding is one of the effective methods for improvement of the hardness, wear and
corrosion resistance of steels. In this research AISI H11 hot working tool steel was plasma …