Minimum quantity lubrication (MQL) is a replacement for dry machining in which a minimum
quantity of lubricant fluid is mixed up with compressed air and sprayed periodically on the …

Minimum quantity lubrication (MQL) is an effective method for addressing technical
challenges associated with high cutting loads during machining. Although much research …

Minimum quantity lubrication (MQL) has been proposed as a promising alternative to
conventional flood cooling to substantially reduce the lubrication usage while maintaining …

Machining-induced residual stress distribution is strongly influenced by the machining
process condition, tool geometry and workpiece material mechanical properties. The high …

Minimum quantity lubrication (MQL) is a promising alternative to conventional flood cooling
to substantially reduce lubricant cost and converse energy. Literature survey shows lack of …

Abstract Minimum Quantity Lubrication (MQL) has increased in popularity over the last two
decades, owing to its economic and environmental benefits over flood cooling. But there are …

This work describes the experimental investigation of the residual stress distribution in the
square pocket milling of 2219 aluminum alloy. The results reveal that the axial depth of cut is …

In this study, minimum quantity coolant/lubrication (MQCL) is found to have significant
impact on the surface quality and mechanical properties of the micromilled thin-walled work …

Stress corrosion is one of the main factors affecting the long-term reliability of mechanical
components. This research investigates the stress corrosion behavior of AISI 4340 steel …

Carbon fiber reinforced polymer (CFRP) is widely used in aircraft manufacturing field
because of superior physical and mechanical properties. Millions of connection holes …