Study of grain boundary orientation gradients through combined experiments and strain gradient crystal plasticity modeling
A combined experimental and strain gradient crystal plasticity framework is presented for
studying the development of orientation and misorientation gradients at the grain …
studying the development of orientation and misorientation gradients at the grain …
Carbon dot complimentary green corrosion inhibitor for crystallographically textured Beta C titanium alloy for marine application: A state of art
U Nichul, V Hiwarkar - Journal of Alloys and Compounds, 2023 - Elsevier
The corrosion properties of Beta C titanium alloy were shown to differ remarkably, by more
than one order of magnitude, with the crystallographic texture. More specifically, the …
than one order of magnitude, with the crystallographic texture. More specifically, the …
Sensitization of austenitic stainless steels: current developments, trends, and future directions
N Srinivasan - Metallography, Microstructure, and Analysis, 2021 - Springer
In this manuscript, the latest developments pertaining to sensitization are discussed.
Sensitization leads to intergranular corrosion and intergranular stress corrosion cracking …
Sensitization leads to intergranular corrosion and intergranular stress corrosion cracking …
Inception of macroscopic shear bands during hot working of aluminum alloys
Macroscopic shear bands (MSB) may develop during hot working of metallic materials. They
are well-understood as a physical manifestation of flow instability, and the processing …
are well-understood as a physical manifestation of flow instability, and the processing …
Study of internal lattice strain distributions in stainless steel using a full-field elasto-viscoplastic formulation based on fast Fourier transforms
In this work, the evolution of internal lattice strains in face-centered cubic stainless steel
under uniaxial tension is studied using a recently developed full-field elasto-viscoplastic …
under uniaxial tension is studied using a recently developed full-field elasto-viscoplastic …
Defining a relationship between pearlite morphology and ferrite crystallographic orientation
This study involved fully pearlitic wires of seven different diameters (5.5–1.6 mm). All
samples were laboratory annealed to re-austenitize and were then air-cooled to reform the …
samples were laboratory annealed to re-austenitize and were then air-cooled to reform the …
The oxidation behavior of iron-chromium alloys: The defining role of substrate chemistry on kinetics, microstructure and mechanical properties of the oxide scale
The present study involved a range of iron-chromium (0–20 wt% Cr) alloys of similar
crystallographic texture. The oxidation kinetics reduced remarkably when Cr content was≥ …
crystallographic texture. The oxidation kinetics reduced remarkably when Cr content was≥ …
Development of anisotropy and strain hardening in damaged stamped parts made of IF steel
E Schmidová, F Klejch, MR Sunilkumar - Engineering Failure Analysis, 2023 - Elsevier
The high formability of interstitial-free (IF) steel for the automotive industry is conditioned by
anisotropy for delayed necking. The processes leading to the formation of the crack under …
anisotropy for delayed necking. The processes leading to the formation of the crack under …
Near boundary gradient zone and sensitization control in austenitic stainless steel
The dependence of degree of sensitization on partially deformed (rolled and then
sensitized) microstructure of 304L stainless steel was investigated. Structures with visible …
sensitized) microstructure of 304L stainless steel was investigated. Structures with visible …
Taming the pseudoelastic response of nitinol using ion implantation
Abstract Implantation of Ni 50.5 Ti 49.5 wire with 30 MeV Ni 6+ ions at doses (< 0.1 DPA)
typically smaller than employed in the literature is shown to systematically alter the …
typically smaller than employed in the literature is shown to systematically alter the …