Heat input is a critical parameter in wire arc additive manufacturing (WAAM). A large number
of studies have been carried out on the heat input of WAAM. However, the current research …

The effects of rare earth (RE) containing Ce and La elements addition on the microstructures
characteristics, tensile properties and fracture behavior of A357 alloy under as-cast and T6 …

In this study, the effects of magnesium (Mg) addition to A356 aluminum alloy at different
amounts on the microstructure and mechanical properties of this alloy were examined. For …

In order to clarify the possibility of Zr substitution for Sc on the modification of Al-Si casting
alloys, the microstructural evolution and tensile properties of Al-Si-Mg based alloys with …

In the present work, a novel casting process named expendable pattern shell casting
process with vacuum and low-pressure (EPSC-VL) was introduced to produce A356-T6 …

This paper investigated the influences of Mg level (0.3 wt%-0.6 wt%) and heat treatment
process on the phase transformation of Mg-Si phase and Fe-rich intermetallics of low …

High strength Al 7075 alloy was manufactured via twin-roll strip casting (TRC) process, and
its microstructure, tensile and fatigue properties were investigated. Commercial Al 7075 …

The relationship between defects and mechanical properties, especially fatigue properties,
of selective laser melted (SLMed) Al-7Si-0.6 Mg alloy built with different processing …

Abstract 6101/A356 bimetal was fabricated by squeeze casting technique and subsequent
T6 heat treatment (heating at 540±3℃ for 5 h, quenching in cold water and ageing at 175℃ …

Abstract Effect of Mg content on age-hardening response, tensile properties, and
microstructures of a T5-treated thixo-cast Al–7wt.% Si–0.01 wt.% Sr alloy has been …