In this study, the effect of microstructural and micro-textural evolution on tensile properties in
hot forged (HF) and hot rolled (HR) medium-Mn steel containing∼ 4 wt% Ni is systematically …

Abstract Fe–Mn–Al–C austenitic steels have promising prospects for lightweight
applications, due to their low density, excellent strength, and ductility. But the specific …

The development of microstructure and texture of twinning-induced plasticity (TWIP) steel
sheet during ECAP at two temperatures (250° and 350°) up to four passes were …

The study of strengthening mechanisms associated with the HAZ is of significant interest for
improving the mechanical properties. In this study, the effect of different heat inputs (6.21 …

Sulfides are promising electrolyte materials for all-solid-state Li metal batteries due to their
high ionic conductivity and machinability. However, compatibility issues at the negative …

The effects of rolling temperature ranging from− 55 to 300° C on dislocation density,
twinning behavior and correlative tensile properties of a high carbon high manganese steel …

Abstract Cobalt–Chromium–Molybdenum (Co–Cr–Mo) alloys are commonly used for
artificial hip and knee joint metallic implants. These components are subjected to repetitive …

An experimental austenitic twin-induced plasticity (TWIP) steel was deformed under hot
torsion tests. Two different total equivalent strains (2.2 and 2.6) were employed in order to …

Biodegradable metallic alloys are currently being explored extensively for use in temporary
implant applications, since the prolonged existence of implants within the body has been …

The microstructural evolution of TWIP steels under high strain-induced microstructural
refinement is complex and requires careful investigation. A FeMnCrC TWIP steel was …