Natural fiber composites (NFCs) also termed as biocomposites offer an alternative to the
existing synthetic fiber composites, due to their advantages such as abundance in nature …

Biocomposites based on lignocellulosic components (eg pulp fibers, nanocellulose and
lignin) are of interest as sustainable replacements for thermoplastic fossil-based materials …

Due to the environmental awareness, researchers are focusing to replace the synthetic with
natural fibers. However, the use of natural fibers has certain limitations like limited to …

The objective of this study was to compare two types of natural short fibers, one lignin-rich
and one lignin-poor, as reinforcing filler of bio-composite plastic in accelerated aging …

The aim of this paper is to analyze the relationship between the tensile properties of flax and
jute fibres and the mechanical performance of associated grafted polypropylene (PP-MAPP) …

The present paper describes the influence of both flexure quasi-static and fatigue loading on
polyamide 12 (PA12) specimens fabricated by fused filament fabrication (FFF) and selective …

Due to rising environmental concerns, the reinforcement of natural fiber with polymer matrix
to develop composite materials is gaining popularity in many sectors in the last few years …

A new natural fiber composite made of high density polyethylene (HDPE) and 40% wt of
short birch fibers (SBF) was developed to replace polyamide (better known under its …

Abstract Fused Deposition Modeling (FDM) process is an economic 3D printing process
prone to surface and dimensional defects. Nylon's water absorption properties make it more …

In this study, the mechanical behavior of high-density polyethylene (HDPE) reinforced with
short natural fiber was evaluated using a test bench designed to monitor the high-cycle …