Toughening of photo-curable polymer networks: a review
SC Ligon-Auer, M Schwentenwein, C Gorsche… - Polymer …, 2016 - pubs.rsc.org
Photo-curable resins based on multifunctional acrylate monomers are commonly applied as
thin films (eg protective coatings, printing inks, etc.) and in recent years are also used for the …
thin films (eg protective coatings, printing inks, etc.) and in recent years are also used for the …
Energy absorption capability of nanocomposites: a review
L Sun, RF Gibson, F Gordaninejad, J Suhr - Composites Science and …, 2009 - Elsevier
Experimental evidence shows that some nanocomposites with special matrices and filler
materials may achieve significant and simultaneous improvements in stiffness, fracture …
materials may achieve significant and simultaneous improvements in stiffness, fracture …
[HTML][HTML] Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
There have been a number of review papers on layered silicate and carbon nanotube
reinforced polymer nanocomposites, in which the fillers have high aspect ratios. Particulate …
reinforced polymer nanocomposites, in which the fillers have high aspect ratios. Particulate …
Toughening of polypropylene with calcium carbonate particles
WCJ Zuiderduin, C Westzaan, J Huetink, RJ Gaymans - Polymer, 2003 - Elsevier
Polypropylene–CaCO3 composites were prepared on a twin screw extruder with a particle
content of 0–32vol%. The influence of particle size (0.07–1.9 μm) and surface treatment of …
content of 0–32vol%. The influence of particle size (0.07–1.9 μm) and surface treatment of …
The interface and interphase in polymer matrix composites: effect on mechanical properties and methods for identification
DA Jesson, JF Watts - Polymer Reviews, 2012 - Taylor & Francis
The interface between the matrix and reinforcing phases can have a significant effect on the
mechanical properties of the resulting composite material. The interface can be studied by a …
mechanical properties of the resulting composite material. The interface can be studied by a …
[HTML][HTML] Effects of chemical treatments of hybrid fillers on the physical and thermal properties of wood plastic composites
JG Gwon, SY Lee, SJ Chun, GH Doh, JH Kim - Composites Part A: Applied …, 2010 - Elsevier
Hybrid filler reinforced composites are considered as a high performance materials, but
limited numbers of researches on hybridizations of wood fibers and mineral fillers were …
limited numbers of researches on hybridizations of wood fibers and mineral fillers were …
Mechanical properties of titanium dioxide-filled polystyrene microcomposites
Microcomposites of polystyrene with different loading of titanium dioxide fillers were
prepared by melt mixing in a brabender plasticorder at a rotor speed of 60 rpm. The …
prepared by melt mixing in a brabender plasticorder at a rotor speed of 60 rpm. The …
[图书][B] Mechanical properties of polymers based on nanostructure and morphology
GH Michler, FJ Balta-Calleja - 2016 - taylorfrancis.com
The improvement of strength and durability in polymers has implications relevant to
industrial, medical, and household applications. Enhanced by the improved knowledge of …
industrial, medical, and household applications. Enhanced by the improved knowledge of …
The toughening mechanism of polypropylene/calcium carbonate nanocomposites
The toughening mechanism of polypropylene (PP) filled with calcium carbonate (CaCO3)
nanoparticles is described. In a previous study (Macromolecule 2008; 41: 9204), we …
nanoparticles is described. In a previous study (Macromolecule 2008; 41: 9204), we …
Thermally stable pyrolytic biocarbon as an effective and sustainable reinforcing filler for polyamide bio-composites fabrication
EO Ogunsona, A Codou, M Misra… - Journal of Polymers and …, 2018 - Springer
Natural fibers are limited in their use as reinforcement to commodity polymers. They cannot
be used to reinforce engineering polymers due to their low thermal stability at high …
be used to reinforce engineering polymers due to their low thermal stability at high …