In this work, pure ZnO and Dy-doped ZnO nanopowdres (NPs) with varying doping
concentration of Dy from 1 to 5% were successfully synthesized by the co-precipitation …

This work describes the physical properties of lead iodide (PbI2) thin films with different
thicknesses that were deposited on ultrasonically cleaned glass substrates using a thermal …

Low-temperature hydrothermal-assisted synthesis of pure and cesium (Cs)(1, 3, 5, 7 and 10
wt%) doped lead iodide (PbI 2) nanorods and nanosheets have been achieved successfully …

Nanocomposite thick films of PbI 2: PVDF-HFP and CsPbI 3: PVDF-HFP were coated on the
top of interdigitated electrodes and studied for their low-dose X-ray sensing behaviour. The …

As a potential candidate for modern optoelectronics, two-dimensional PbI2 nanosheets have
received much attention. In this paper, we report a simple, low-cost cooling supersaturated …

Lead iodide polycrystalline films have been deposited on corning glass substrates using
solution evaporation in oven. Films 6 μm-thick were obtained with full coverage of the …

Some semiconductor materials such as lead iodide (PbI2) have applications in the detection
of ionizing radiation at room temperature using the direct detection method. In this work we …

Semiconductor lead iodide (PbI 2) films have been extensively studied due to their potential
applications in room temperature ionizing radiation detectors. The influence of PbI 2 solution …

The flash-evaporation technique was utilized to fabricate undoped 1.35-μm and 1.2-μm thick
lead iodide films at substrate temperatures T_ s= 150 T s= 150° C and 200° C, respectively …

Polycrystalline lead iodide (PbI 2) thin films have been deposited by spray pyrolysis method
using N, N-dimethylformamide (DMF) as solvent as a function of several deposition …