Organic field-effect transistors (OFETs) are promising for numerous potential applications
but suffer from poor charge injection, such that their performance is severely limited. Recent …

From a design, optimization and fabrication perspective, an organic light-emitting diode
consisting of only one single layer of a neat semiconductor would be highly attractive. Here …

To make high-performance semiconductor devices, a good ohmic contact between the
electrode and the semiconductor layer is required to inject the maximum current density …

Recent advances in chemical vapour deposition have led to the fabrication of large
graphene sheets on metal foils for use in research and development. However, further …

As electrode work function rises or falls sufficiently, the organic semiconductor/electrode
contact reaches Fermi-level pinning, and then, few tenths of an electron-volt later, Ohmic …

Electrodes with low work functions are required to efficiently inject electrons into
semiconductor devices. However, when the work function drops below about 4 electronvolts …

Enforcing balanced electron–hole injection into the emitter layer of quantum-dot light-
emitting diodes (QLEDs) remains key to maximizing the quantum efficiency over a wide …

Conductive atomic force microscopy (C-AFM) is a widely used tool for studying the charge
transport properties of organic semiconductor films with nanoscale resolution. Local hole …

Despite decades of research, the fundamental question of structure and morphology of the
poly (3,‐4‐ethylenedioxythiophene): poly (styrene sulfonate) complex (PEDT: PSS) …

Contact resistance limits the performance of organic field‐effect transistors, especially those
based on high‐mobility semiconductors. Despite intensive research, the nature of this …