Quench detection and protection for high-temperature superconductor accelerator magnets
M Marchevsky - Instruments, 2021 - mdpi.com
High-temperature superconductors (HTS) are being increasingly used for magnet
applications. One of the known challenges of practical conductors made with high …
applications. One of the known challenges of practical conductors made with high …
Influence of local inhomogeneities in the REBCO layer on the mechanism of quench onset in 2G HTS tapes
The resistive-type of superconducting fault current limiters (R-SFCL) using the second
generation of high-temperature superconductors (2G HTS) are well adapted to power grid …
generation of high-temperature superconductors (2G HTS) are well adapted to power grid …
Stabilizers for REBCO Conductors for High Performance SFCL
Resistive REBCO fault current limiter (FCL) is a promising solution to the fault current issue
in electric grids, which is not fully satisfactorily solved. However, the cost of the …
in electric grids, which is not fully satisfactorily solved. However, the cost of the …
Normal zone propagation in various REBCO tape architectures
C Lacroix, J Giguère, SMB Hartman… - Superconductor …, 2022 - iopscience.iop.org
The normal zone propagation velocity (NZPV) of three families of REBCO tape architectures
designed for superconducting fault current limiters and to be used in high voltage direct …
designed for superconducting fault current limiters and to be used in high voltage direct …
Enhanced normal zone propagation velocity in REBCO coated conductors using an intermetallic stabilizer coating
P Barusco, H Ben-Saad… - IEEE Transactions …, 2024 - ieeexplore.ieee.org
The Current Flow Diverter (CFD) is an established concept that has proven to effectively
reduce the probability of destructive hot spots by boosting the normal zone propagation …
reduce the probability of destructive hot spots by boosting the normal zone propagation …
Investigation of Pinning and Current-Carrying Capacity in 2G HTS Wires With Artificial Pinning Centers Obtained at Various Deposition Rates
PN Degtyarenko, AV Ovcharov… - IEEE Transactions …, 2023 - ieeexplore.ieee.org
The production of second-generation high-temperature superconductors (2G HTS) greatly
simplifies the construction of electrical devices based on them. In turn, the performance of …
simplifies the construction of electrical devices based on them. In turn, the performance of …
Transient electrical characteristics of no-insulation REBCO coil impregnated with GaInSn liquid metal
L Liu, P Li, G Wang, Z Li, Y Zhu… - IEEE Transactions …, 2022 - ieeexplore.ieee.org
Due to higher critical current density and better self-protection, no-insulation (NI) high-
temperature superconducting (HTS) coils wound by REBCO coated conductors have been …
temperature superconducting (HTS) coils wound by REBCO coated conductors have been …
Analysis of current and heat transfer in locations with reduced critical current in coated conductor tape
F Gömöry, J Šouc - Superconductor Science and Technology, 2024 - iopscience.iop.org
Variation of the critical current along the conductor length is a feature commonly
encountered in industrially produced REBCO tapes called coated conductors (CCs). A …
encountered in industrially produced REBCO tapes called coated conductors (CCs). A …
Meter-scale REBCO tapes with a current flow diverter architecture
HB Sâad, D Horn-Bourque… - IEEE Transactions …, 2024 - ieeexplore.ieee.org
The current flow diverter (CFD) architecture allows increasing the normal zone propagation
velocity (NZPV) of rare-earth barium copper oxide (REBCO) tapes. A continuous reel-to-reel …
velocity (NZPV) of rare-earth barium copper oxide (REBCO) tapes. A continuous reel-to-reel …