[HTML][HTML] A review of additive manufacturing of cermets
Cermets are a category of materials including ceramic and metallic phases, which possess
the combined properties of both phases. Over the last few decades, numerous conventional …
the combined properties of both phases. Over the last few decades, numerous conventional …
Confinement effects on compressive and ballistic performance of ceramics: a review
Ceramic materials have been extensively used as armour materials for nearly 50 years and
continue to attract great interest in the field of defense technology. As confinement is crucial …
continue to attract great interest in the field of defense technology. As confinement is crucial …
Analysis of the influence of different constraints on the ballistic performance of B4C/C/UHMWPE composite armor
Y Zhang, B Cui, H Dong, Y Huang, Z Li, T Jin - Ceramics International, 2022 - Elsevier
A lightweight composite armor system composed of boron carbide (B 4 C) ceramic panels,
carbon-fiber interlayer, and ultra-high molecular weight polyethylene (UHMWPE) backplate …
carbon-fiber interlayer, and ultra-high molecular weight polyethylene (UHMWPE) backplate …
[HTML][HTML] 装甲陶瓷的界面击溃效应
谈梦婷, 张先锋, 包阔, 伍杨, 吴雪 - 力学进展, 2019 - lxjz.cstam.org.cn
界面击溃效应(interface defeat) 是射弹撞击陶瓷材料过程中, 陶瓷表面产生的特有现象.
国内外学者在近30 年来对陶瓷界面击溃效应开展的大量研究工作表明界面击溃效应中射弹界面 …
国内外学者在近30 年来对陶瓷界面击溃效应开展的大量研究工作表明界面击溃效应中射弹界面 …
Influence of prestress on ballistic performance of bi-layer ceramic composite armors: experiments and simulations
R Zhang, B Han, L Li, ZN Zhao, Q Zhang, QC Zhang… - Composite …, 2019 - Elsevier
The effect of prestress on the ballistic performance of bi-layer ceramic composite armors was
explored both experimentally and numerically. Three types of target plate with different …
explored both experimentally and numerically. Three types of target plate with different …
A theoretical analysis for the normal impact fracture in thin brittle plates based on the principle of minimum external work
L Lu, Z Liu, Z Zhuang - Journal of the Mechanics and Physics of Solids, 2023 - Elsevier
This paper presents a theoretical methodology for predicting the fracture pattern of a thin
brittle plate subjected to normal impact loads. The approach is based on the principle of …
brittle plate subjected to normal impact loads. The approach is based on the principle of …
Impact damage of narrow silicon carbide (SiC) ceramics with and without environmental barrier coatings (EBCs) by various foreign object debris (FOD) simulants
The leading and trailing edges of turbine airfoils are highly susceptible to impact by foreign
object debris (FOD) entrained in the gas stream of turbine engines. In this study, a narrow …
object debris (FOD) entrained in the gas stream of turbine engines. In this study, a narrow …
Analysis of ballistic resistance of composites based on EN AC-44200 aluminum alloy reinforced with Al2O3 particles
The work presents the research conducted on the impact resistance of newly developed
metal-ceramic composites with aluminum matrix on firing with 5.56× 45 mm caliber …
metal-ceramic composites with aluminum matrix on firing with 5.56× 45 mm caliber …
Assessment of the Impact Resistance of a Composite Material with EN AW-7075 Matrix Reinforced with α-Al2O3 Particles Using a 7.62 × 39 mm Projectile
The paper presents the results of studies on the effects of shooting composite materials
produced by pressure infiltration with the EN AW-7075 alloy as a matrix and reinforcement in …
produced by pressure infiltration with the EN AW-7075 alloy as a matrix and reinforcement in …
A novel method to avoid the sintering shrinkage of Al2O3-Cr cermets formed by direct ink writing
D Zhang, C Chu, S Ma, Y Wang, C Duan, J Guo… - Journal of Alloys and …, 2023 - Elsevier
Abstract The three-dimensional (3D) printed ceramic body often shrinks considerably after
thermal processing, which seriously affects the forming accuracy of the final formed parts. In …
thermal processing, which seriously affects the forming accuracy of the final formed parts. In …