Micron-sized aluminium powder alloy AA 6005A was reinforced with different volume
fractions, from 1.5, 3 and 6 vol.%, of 20–30 nm diameter nano-sized TiC particles (n-TiC) …

The morphological and microstructural changes during mechanical milling of Al powder
mixed with 5vol% nanoscaled alumina particles (35nm) were studied. The milling was …

This work investigates the relationships between the components of powders, namely, the
powder surface morphology, the flow characteristics and the compressibility of low-energy …

The feasibility of adding AlCrTiV high entropy alloy (HEA) particles to molten aluminum to
make metal matrix composites was studied. Equiatomic AlCrTiV HEA particles, produced by …

Due to the increasing demand for lighter materials with enhanced properties, the upgrade of
techniques to improve the production of high-performance composite materials is of great …

Mechanical alloying technique has been used to produce aluminium-based metal matrix
composite powders. As base material, the aluminium alloy AA2014 was selected, and two …

In this study, hot press method has been used to fabricate Al/Al3Ti composite. In situ reacted
Al3Ti compound is formed through Al and TiO2 powder blend in order to enhance …

Dispersion of metallized graphite nanoparticle reinforcements in 7075 aluminum alloy
(Al7075) and composites were microstructurally and mechanically characterized. Al7075 …

The present work concerns the processing of 7075 Al alloy by cold compaction and hot
extrusion of a premixed powder. To this end, a premixed Al–Zn–Mg–Cu powder, Alumix …

Aluminium products are becoming popular and the demand is increasing because of its
special properties such as excellent corrosion resistance with good strength, recyclable and …