The bio-corrosion properties of Mg–Zn–Mn alloys with and without Y in Hank's solution at
37° C were investigated by using electrochemical test and electrochemical impedance …

Magnesium is very reactive and therefore magnesium electroplating in aqueous solutions is
hazardous. Mg is classified as a water sensitive substrate from the electrodeposition point of …

Coating of AZ31B, AE 42 and ZRE1 wrought magnesium alloys was carried out using
electroless Ni plating technique in a solution of nickel sulphate, sodium hypophosphite …

Alumina magnesium metal matrix composites are a precious alternative for aerospace and
automotive applications because of their high stiffness-to-weight ratio. A considerable deal …

The development of the microstructure in Mg–Y–Nd–Zr (commercial WE43) and Mg–Tb–Nd
alloys and their thermal stability were investigated using electrical resistivity measurements …

Mechanical properties and creep resistance of the MgY4Zn1Mn1 alloy in the as cast as well
as in the T5 condition were compared to those of the MgCe4Zn1Mn1 alloy in the same …

Conventionally cast Mg–5Y–4Rare Earth–0.5 Zr alloy (WE54) was solution treated (525°
C/8h—T4) and one part subsequently aged (200° C/16h—T6). Powder from the cast WE54 …

Magnesium alloys are promising candidates for biodegradable medical implants which
reduce the necessity of second surgery to remove the implants. Yttrium in solid solution is an …

Magnesium-based hydrides are well known that they have a high hydrogen-storage
capacity. In this study, two different methods have been provided for hydrogen surface …

Response to isochronal annealing up to 440° C of squeeze cast Mg–Y–Zn alloy and of the
same alloy prepared by powder metallurgy (PM) and extruded at 280° C was studied by …