Review of densification of titanium based powder systems in press and sinter processing
IM Robertson, GB Schaffer - Powder metallurgy, 2010 - Taylor & Francis
The development of novel extractive metallurgy techniques for titanium offers the prospect of
lower cost Ti powder and therefore wider application of Ti. This review is largely confined to …
lower cost Ti powder and therefore wider application of Ti. This review is largely confined to …
Review of sintering and densification in nuclear fuels: Physical mechanisms, experimental results, and computational models
This work is a review of two density changes common in UO 2 nuclear fuel: sintering and
irradiation-enhanced densification. These density changes must be understood in order to …
irradiation-enhanced densification. These density changes must be understood in order to …
Microwave versus conventional sintering: estimate of the apparent activation energy for densification of α-alumina and zinc oxide
F Zuo, A Badev, S Saunier, D Goeuriot… - Journal of the European …, 2014 - Elsevier
A comparative study between the conventional and 2.45 GHz microwave multimode
sintering behavior of insulator (α-Al 2 O 3) and semi-conductive ceramic (ZnO) was …
sintering behavior of insulator (α-Al 2 O 3) and semi-conductive ceramic (ZnO) was …
Densification and grain growth during isothermal sintering of Mo and mechanically alloyed Mo–TZM
Isothermal sintering behavior of pure molybdenum (Mo) and mechanically alloyed Mo–TZM
(Mo–0.6 Ti–0.2 Zr–0.02 C) has been investigated in the temperature range 1000–1800° C. A …
(Mo–0.6 Ti–0.2 Zr–0.02 C) has been investigated in the temperature range 1000–1800° C. A …
Comparison of sintering of titanium and titanium hydride powders
IM Robertson, GB Schaffer - Powder metallurgy, 2010 - Taylor & Francis
The cold compaction and vacuum sintering behaviour of a Ti powder and a Ti hydride
powder were compared. Master sintering curve models were developed for both powders …
powder were compared. Master sintering curve models were developed for both powders …
钼及钼合金烧结技术研究及发展
赵虎 - 粉末冶金技术, 2020 - pmt.ustb.edu.cn
从粉末冶金烧结理论, 烧结设备, 烧结工艺参数及新型烧结技术等方面概述了钼及钼合金烧结
技术的研究现状及进展. 结论指出, 钼及钼合金烧结理论仍集中在传统粉末冶金理论体系; …
技术的研究现状及进展. 结论指出, 钼及钼合金烧结理论仍集中在传统粉末冶金理论体系; …
Effect of die compaction pressure on densification behavior of molybdenum powders
Two grades of commercially available ultrafine molybdenum powders are investigated for
their compaction and densification behavior. Dilatometer studies were performed on the two …
their compaction and densification behavior. Dilatometer studies were performed on the two …
Morphological and chemical evolution of transient interfaces during zinc oxide cold sintering process
Although zinc oxide has a high melting point of 1975° C, the recent development of the cold
sintering process has shown that highly dense polycrystalline ceramics can be obtained at …
sintering process has shown that highly dense polycrystalline ceramics can be obtained at …
Effects of shape and size of second phase on mechanical properties of sintered Mo-Y2O3 alloys
Z Wu, Z Na, LU Yao, H Liu, B Duan, X Liu… - … of Nonferrous Metals …, 2022 - Elsevier
The morphology and size of second phase greatly influence the strengthening effect on
oxidation dispersion strengthened Mo alloys. In this work, a novel nanostructuring strategy is …
oxidation dispersion strengthened Mo alloys. In this work, a novel nanostructuring strategy is …
Some effects of particle size on the sintering of titanium and a master sintering curve model
IM Robertson, GB Schaffer - Metallurgical and materials transactions A, 2009 - Springer
The press-and-sinter method of producing net shapes was applied to titanium alloys. The
quantitative effects of the particle size of titanium and Ti-6Al-4V powders on the green and …
quantitative effects of the particle size of titanium and Ti-6Al-4V powders on the green and …