A method is proposed to establish control of technological processes that would be optimal
in terms of speed and final state on the basis of analyzing the solution of a system of …

The object of research is the structural lamellar graphite cast iron, where the carbon
equivalent (Ceq) is in the range of (4,214-4,372)% and the carbon content (C) is in the range …

The object of research is hypoeutectic cast iron intended for cast parts operating under
abrasive friction conditions. Such parts are mixer blades, the operational properties of which …

In this work, the optimal combinations of Al–Si in cast iron for cast parts for machine-building
purposes were determined with the aim of subsequent selection of rational modes of …

The objects of the study were diagnostic features that allow determining the quality of
controlling temperature modes of induction crucible melting. For this, in the normalized …

The object of research is structural iron with lamellar graphite, in which the carbon
equivalent (Ceq) is in the range (4.2-4.4)%, and the carbon content (C) in the range (3.42 …

The object of this research: cast iron grade DSTU EN 1561 (EN-GJL-200), used for the
manufacture of brake drums for KrAZ trucks. Investigated problem: obtaining the effect of …

The object of research in this work was cast iron for machine-building parts, alloyed with Al.
The possibility of improving the mechanical properties of cast iron by choosing the optimal …

The object of research: cast iron grade DSTU EN 1561 (EN-GJL-200), used for the
manufacture of body parts for mechanical engineering. Investigated problem: the choice of …

Розглянуто проблему точності класифікації, яка визначається часткою правильно
класифікованих об'єктів при використанні параметричних методів. Показано, що …